Nikodemus_Blackwood 1 Posted March 29, 2016 #1 Report Share Posted March 29, 2016 (edited) [OOC: INVENTORY LIST WILL BE UPDATED DAILY WITH NEW ITEMS AS THEY ARE MADE AND APPROVED. IF A SPECIFIC ITEM IS WANTED AND NOT IN INVENTORY, PLEASE PM FOR ME WITH ITEM INFO, THEN MAKE AN IC POST HERE REQUESTING THE ORDER.] Within the castle like walls of Nimbus, the world is a dull grey monotone with hints of green shading about the edges. The large crystal formations that burn with an inner fire form the main source of light within the mountain that Nimbus is built. Each building is similar in many ways to one another, all made of stone, some more intricately carved, others plane and smooth, some tall and thin, others wide and fat, and many other variations in between mark the city as being one that relies on self provided resources and trade with other floors. The city safezone provides a home for players who are adventuring and working towards being front liners, and a base for those brave enough to venture higher and scout the floors. Amongst a small row of shops and industrial buildings on the outskirts of the Nimbus, a 2 level building made of smooth grey stone looks remarkably like all the others, but it is this building that has the newest occupant of the city. A small stone plinth sits just beside the door to it's left and in it the shops name is chiseled in raised stone lettering. 'The Cracked Crucible' flows in a block script and is polished smooth to show well in the greenish hues to any looking at it. Within, many racks and shelves line the walls and sit upon stone block platforms here and there about the shop. Most are fairly empty as the shop just opened recently, but as each day passes, new items begin to fill each rack and shelf. Just behind the counter a large open doorway is cut into the grey stone and leads into the blacksmiths forge. Within, the stoked forge roars and crackles as it burns through coal and wood kindling, its deep brass red coloring letting all who see it know that it's heat is extreme. A large anvil sits upon a stone block, bringing it to around 4 feet high, and resting in a bound leather skirt about the block are the many different tools of the blacksmith. A small stock of material sits along one wall organized into neat rows with small gaps between each row of materials. A large trough sits a mere foot away from the forge and then anvil, creating a perfect triangle pattern that the blacksmith walks when working on items. Along the farthest wall, a chute of coal and a stack of wood kindling sits near one corner, and just opposite them, a table with various crucibles, strange powders, gems and filaments, and other materials sit spread along it's length. The owner of this new shop can often be found working material on the anvil and crafting new items, or adjusting the shelves and racks to make the best use of the room he has. When not there, the shop is locked and a small wooden plank with the words "Hunting for materials" is hung from the doors handle. Being fairly new, it is known that the shop will see little to no foot traffic for some time and that will hamper most word of mouth sales as well, but the new blacksmith knows that as each new day brings the front lines to a new floor, more and more players will need equipment, and that means more and more shop owners will be needed to fill large orders of good quality items. Nikodemus, owner and blacksmith, knows one day he will be called upon by players for help, and when that day comes, he wants to be prepared. The Cracked Crucible Owner: Nikodemus Rank 7: Professional Blacksmith. 1037/1280 EXP 8 crafts a day for T1 or T2 weapons, shields, armor, and crafting Tools. Spoiler ►The CD Result Chart (Rank 7) [1] = Critical failure (Lose materials) [2-3] = Bad item (Possible to salvage items on a 15+ loot die result) [4-7] = Good item [8-9] = Uncommon item (1 enhancement slot)[10-11] = Rare item (2 enhancement slots)[12] = Perfect item (3 enhancement slots) Epic Fail, Fail, and Bad Item: 1 EXPGood Item: 2 EXPUncommon Item: 3EXPRare Item: 5 EXPPerfect Item: 8 EXP Items used when crafting: Blacksmith's Fine Crafting Tongs: +1 EXP per craft. Spoiler Name: Blacksmith's Fine Crafting Tongs. Profession: Blacksmith Rank: 5 ID# 57851 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Tool Enhancements: (3/3) Ambition: Adds +1 EXP for every craft. (3 Slots) Description: A pair of Tongs used to hold billets when hot. These are long, with wide clamping jaws and a strong riveted pivot to provide good pressure and keep items steady when crafting. 1 Weyland The Blacksmith plushie: +1 Crafting Die Spoiler Name: Wayland the Blacksmith PlushieItem Type: PlushieTier: 1Quality: PerfectEnhancements: +1 Crafting DieDescription: A small plush doll of the Germanic God of Blacksmiths and Soldiers. On its back a semi transparent white crowned logo is discreetly placed, the usual branding from the manufacturing shop. Trinket of a Silver Dragon: Spoiler Name: Trinket of a Silver Dragon Your Profession: Artisan Your Rank: 6 ID: 58637 Roll: 12 Item Type: Trinket Tier: 1 Quality: Perfect Enhancements: Crafting attempt Description: A small partially animated statue of a crafted Silver Dragon. A trinket which is designed to move its head at the end of the day, it breathes out air and energy that can revitalize a player allowing them to make an additional craft. Pricing: Spoiler Legend: [Price in Col] {Price in Mats}* Bad item: [50] {2} Good Item: [100] {4} Uncommon item: [500] {8} Rare Item: [1000] {12} Perfect** [1500] {15} *prices subject to change. please inquiry or feel free to offer a price. **This includes Tools for crafting as they are required to be perfects. Inventory: 9 Bad Quality Items Good Quality: Spoiler 2 Good Quality Longsword 1 Good Quality Kite Shield 1 Good Quality Spear 2 Good Quality Heavy Armor Gauntlets 1 Good Quality Steel Great Helm 1 Good Quality Bull Whip 1 Good Quality Pairing Dagger 2 Good Quality Shiled 2 Good Quality Warhammer 1 Good Quality 2 Handed Battle Axe Perfects: Spoiler Cairnwraith's Razor Spoiler Name: Cairnwraith's Razor Profession: Blacksmith Rank: 1 ID# 54547 CD: 12 (11 + 1) Quality: Perfect Tier: 1 Item Type: One Handed Straight Sword Enhancements: (3/3 slots used) Bleed (1 Slot): Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 damage for 2 turns to enemy/mob. This only applies to natural rolls (unmodified); DMG +1 (1 slot), Accuracy: +1 BD (1 Slot) Description: A one handed longsword made of exquisite blackened steel. The blade is sharpened to such a fine degree, it passes through anything so finely and deeply that the target feels no real pain and most die from blood loss without realizing they were touched by this blades gentle kiss. The cross guard is ornately carved like like twin skeletal hands reaching out with clawed fingers, while the handle itself is shaped like to resemble a Talwar hilt. It is named for a spectral entity found in ancient desert cairns in Arabia whose claws are sharp and thin. they swarm their victims and cut them multiple times over the body, bleeding them dry and sucking the life essence from their blood. Gorgon's Gaze: Spoiler Name: Gorgon's Gaze Profession: Blacksmith Rank: 1 ID# 54549 CD: 13 (12 + 1) Quality: Perfect Tier: 1 Item Type: One Handed War Hammer Enhancements: (3/3 slots used) Paralyze (1 Slot): Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralyzed; Accuracy: +2 BD (2 Slots) Description: A large one handed Warhammer made of steel. The head of the hammer is shaped in the visage of a a Gorgon, the face of the hammer has a carved ornate eye in the center with a rune of paralysis etched into it's pupil. The end of the hammer is made into the shape of 8 snake heads with their mouths open. The handle is carved in a swirling scaled pattern to replicate the snake-like body of the Gorgon. At the end of the handle, another snake head is ornately carved with small emeralds in it's eyes. Gáe Derg the Red Javelin Spoiler Name: Gáe Derg the Red Javelin Profession: Blacksmith Rank: 2 ID# 54696 CD: 13 (12 + 1) Quality: Perfect Tier: 1 Item Type: One Handed Assault Spear Enhancements: (3/3 slots used); +1 damage (1 slot), Accuracy: Adds +1 to the BD, but cannot cause a critical hit.(1 slot), Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot) Description: Gáe Derg the Red Javelin, is a well crafted spear made from honed steel forged to a great sharpness. The haft of the spear is made of a hard Ebony Ironwood and inlaid with thick bands of gold filigree. The collar where the haft meets the blade is crafted into the visage of a Raven with it's wings spread. Extending from it's opened beak is a large 1 foot long, 6 inch wide blade. The blade it engraved with curling knotwork and runic symbols down it's length on both sides. Set within the sockets of the bird's eyes are 2 polished red gemstones that glow with an inner fire. On the opposite end of the haft sits an pommel shaped like a raven's tail. The pommel is 4 inches wide and 8 inches in length and sharpened finely in order to be used to cut and slice if needed. The spear is made in the essence of it's mythological predecessor, said to inflict wounds so terrible that the victims do not survive. Blade of Erebus: Spoiler Name: Blade of Erebus Profession: Blacksmith Rank: 4 ID# 56270 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Two Handed Straight Sword Enhancements: (3/3) Damage: Adds +2. (2 slots), Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) Description: A large 2 handed sword. It's broad blade is etched with runes that glow with a natural fire due to the crystals that were powdered and added to the metal. It is sharp and powerful, being able to slice an opponent so deep they will be maimed for life, if they survive the wound. Umi no tamashī (Soul of the Sea): Spoiler Name: Umi no tamashī (Soul of the Sea) Profession: Blacksmith Rank: 4 ID# 56347 CD: 11 + 1 = 12 Quality: Perfect Tier: 2 Item Type: Katana Enhancements: (3/3) Damage: Adds +(1 * Tier Level = 2) base damage for every slot used. (1 Slot) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level = 16) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (2 slots) Description: A large Katana made of a good material. It's blade has a gentle curve in it's spine, making it perfect for slashing. The hamon is in a pattern much like roiling waves in the ocean. A fuller runs down the length of each side and touched near the tang. The handle is made of Ironwood and wrapped in a type of mob skin similar to rayskin. The wrap is made of a fine black material, with 2 silver menuki in the shape of a skull with bones beneath it. The Scabbard is made of polished Ebony Ironwood and decorated with a similar wrap and 2 brass collars at each end. The tsuba is made of similar silver as the Menuki' and has an etching/engraving of a sun behind clouds and three small birds flying. Helmet of the Ashen: Spoiler Name: Helmet of the Ashen Profession: Blacksmith Rank: 4 ID# 56434 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: Heavy Armor Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier 2 = 18 * 2 = 36) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Regen: Heals you +(9 * Tier 2 = 18) per slot after every attack turn from your opponent on a CD roll of 6 or higher. (1 slot) Description: A helmet made of the best steel. The helmet is shaped in to fit perfectly on the wearers head. It's visor is slightly exaggerated and and curved to form an angled nasal guard. Along the neck of the helmet, a grey lining of fur is attacked to leather and riveted to the metal. The main top of the helmet has a sash plume that hangs down to the base of the neck. The steel is of a mottled, almost ash grey with hints of black steel in some places. Tiny veins of pulsing red can been seen faintly along the helmet as if the metal was still hot from forging. Ascalon: Spoiler Name: Ascalon Profession: Blacksmith Rank: 4 ID# 56623 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Two Handed Assault Spear Enhancements: (3/3) Accuracy: +1 BD, cannot cause crits. DMG: +1, Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier 1 = 8) damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). Description: A large two handed spear, Ascalon is made of a cherry wood that is colored red. The shaft is reinforced with an inner core of hard Ironwood to protect it from shattering. The blade collar of the spear is shaped like the head of a dragon, the blade protruding from it's mouth. the blade is forged with gentle curves running from the collar to near the tip. the last 4 inches of the blade are straight and tapered to a point for piercing through tough scales or thick armor. The spear is named for the famed spear of a dragon slayer saint. Uchigatana: Spoiler Name: Uchigatana Profession: Blacksmith Rank: 4 ID# 56951 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: Katana Enhancements: (3/3) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier 2 = 16) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (2 Slots). Damage: +2 DMG. (1 Slot) Description: A strange variant of the Katana, the Uchigatana is nearly 6 feet long, the blade being a good 5 and a half feet in length. It's steel is made of a unique combination of Ebony Steel with Ash-infused Steel, giving the blade a dark, almost rusted look to it. The blade is sharp and capable of causing deep cuts that can bleed for long periods of time. Shield of the Caduceus: Spoiler Name: Shield of the Caduceus Profession: Blacksmith Rank: 5 ID# 57928 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Shield Enhancements: (3/3) Recovery: In your own turn, if you roll a CD of 6 or higher you will recover 1 energy per slot used along with the 1 passive energy recovery every player has. Regen: Heals you +9 per slot after every attack turn from your opponent on a CD roll of 6 or higher. Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Description: A shield made of Ivory Steel. The face of it has an image raised in the metal of a staff with twin snakes curling about it in a helix, their heads meeting at the top of the rod. Upon the back of each snake, a large wing protrudes from them, signifying they are flying serpents. All about the staff and face of the shield, small swirls and lines are etched within the metal, giving it depth and contrast to the raised image. The swirls and lines seem to move if one looks at them just right, but they hurt the eyes to stare upon for to long. This shield is named for the staff of a Hermes and is a symbol of health and medicine. Armor of Breaking Wave: Spoiler Name: Armor of Breaking Waves Profession: Blacksmith Rank: 5 ID# 58612 CD: 11 + 1 = 12 Quality: Perfect Tier: 2 Item Type: Heavy Armor Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier Level 2) 18 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (3 slots) Description: An ornate set of heavy armor made to resist the most damage. It is made from a powerful Ebony steel and is black with silver chasing and etchings. It has a large ornate plating along the chest and back that stops most weapons and deflects them to the sides. The Sword of Wotan: Spoiler Name: The Sword of Wotan Profession: Blacksmith Rank: 6 ID# 58893 CD: 11 + 1 = 12 Quality: Perfect Tier: 2 Item Type: One Handed Curved Sword Enhancements: (3/3) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (1 Slots). Damage: +4 DMG (2 Slots) Description: A large one handed curved Kopesh made of bronzed steel that is chased with a gold in engraved fullers along the blade and handle. Engraved in the blade and handle are strange runes. This blade is named from the Nordic God of Death and the Underworld. The Blade of Cogliostro Spoiler Name: The Blade of Cogliostro Profession: Blacksmith Rank: 6 ID# 58894 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: One Handed Longsword Enhancements: (3/3) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 Slot). Damage: +4 DMG (2 Slots) Description: A large One Handed Lonsword made in the shape of a standard European Longsword. It has a large cross guard and long, twin sided blade. The large pommel is a round medalion and is set with a ruby. The blade is named for a legendary sword used by a knight named Cogliostro, who was said to instill a paralyzing fear in his enemies before slaying them. Elfenlied: Spoiler Name: Elfenlied Profession: Blacksmith Rank: 6 ID# 59193 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: One Handed Long Sword Enhancements: (3/3) Damage: +2 DMG per slot. (2 Slots) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 slot) Description: A Germanic style long sword made from meteoric iron. The blade is forged with etched vines down the blade, and a cross guard made in the semblance of 2 elven fae sitting with the back to the blade, their feet extended to become the quillons. The handle of the blade is shaped like a tree's trunk, and ends in a pommel shaped like roots grabbing an emerald stone. It is named for the German Poem known in english as "Elf Song", and has been rumored to literally sing when it soars through the air. Claw of the Phoenix: Spoiler Name: Claw of the Phoenix Profession: Blacksmith Rank: 6 ID# 59144 CD: 11 + 1 = 12 Quality: Perfect Tier: 2 Item Type: Katana Enhancements: (3/3) Damage: +2 dmg per slot. (2 slots). Accuracy: +1 BD (1 slot) Description: A large katana made from a material that gives it a color like flames. The blade's hamon was shapped like fluttering feathers. The tsuba of the weapon is etched and engraved like a phoenix curling around the sword. The Menuki beneath the red and gold wrap are shaped like feathers. Spear of Wisdom, Gungnir: Spoiler Name: Spear of Wisdom, Gungnir Profession: Blacksmith Rank: 7 ID# 59306 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: 2 Handed Assault Spear Enhancements: (3/3) Damage: Adds +(1 * Tier Level 2) base damage for every slot used. (2 Slots) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (1 Slot) Description: A large two handed spear made of a strange golden and brass material. The blade of the spear is nearly 2 feet in length, and a half a foot in width. Two large quillons jut from the base of the blade, and the shaft is almost as thick as a mans arm, with 2 grooved areas in it to grab hold the weapon. the shaft is etched with symbols and runes, and on the surface of the blade is the image of a Raven holding an eye in it's mouth. The spear is named for the fabled spear of the Nordic God Woden. Armor of Achilles: Spoiler Name: Armor of Achilles Profession: Blacksmith Rank: 7 ID# 59378 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Shield Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (3 slots) Description: A set of armor made in the style of ancient greek soldiers. The armor encloses the wearer in a layer of protection that is said to withstand any blow. Named for a hero of Greek literature, Achilles also weilded a spear and was said to be nigh instoppable, until being brought down by a poisoned arrow to the heel. The Dragons Bead Spoiler Name: The Dragons Bead Profession: Blacksmith Rank: 7 ID# 59746 CD: 11 + 1 = 12 Quality: Perfect Tier: 2 Item Type: Katana Enhancements: (3/3) Damage: Adds +(1 * Tier Level = 2) base damage for every slot used. (3 slots) Description: A sharp curved sword with a long blade length to rival a great sword. The blade is sharp and honed perfectly to allow for the best cut possible. The hamon of the blade is of a curling swirled pattern, with peaks that fall in on themselves. The Tsuba is eteched in gold in the image of a dragon curling around a large stone. Ebon Mail: Spoiler Name: Ebon Mail Profession: Blacksmith Rank: 7 ID# 59815 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Armor Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier Level 1) of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (3 slots) Description: A set of ebony armor that protects the wearer head to toe. The armor is chased with greyish silver details on places, and it is in the shape and visage of a set of european knight armor. The helmet is rounded with a visor in the traditional rounded shape. Wyvern Blade: Spoiler Name: Wyvern Blade Profession: Blacksmith Rank: 7 ID# 59817 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: One handed curved sword Enhancements: (3/3) Damage: +1 Damage per slot. (2 Slots) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralyzed; (1 Slot) Description: A blade made from an ebony steel. The quillons are shaped like the wings of a dragon, the handle it's neck, and the pommel it's head. The eyes are jewels set within the metal. The blade is curved slightly, giving it the look of a dragons tail. The blade is named for the mythical creature that is a dragon with a scorpions tail, using it to sting and paralyze pray before feasting. Divine Axe Rhitta: Spoiler Name: Divine Axe Rhitta Profession: Blacksmith Rank: 5 ID# 58522 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: One Handed Battle Axe Enhancements: (3/3) Damge: +1 DMG per slot used. (3 slots) Description: A large one handed battle axe. The handle is made of an ebony steel that is shaped normally, but has a strange handle at the bottom of it with 3 large spikes that are used to punch an enemy. At the top, the Axe head is shaped like a crescent moon on one. On the other, it a large spike the size of a spade head protrudes from the handle, engraved with designs along it. Fists of Manju: Spoiler Name: Fists of Manju. Profession: Blacksmith Rank: 4 ID# 57068 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Heavy Armor Gauntlets Enhancements: (3/3) Unarmed Damage: Adds +(1 * Tier 1) base damage for every slot used. (2 Slots), Heavy Momentum: When you miss, gain a +(1 * Tier 1) base dmg. This can stack up to the amount of slots used. The +dmg goes away after a successful hit. (1 Slot) Description: A pair of gauntlets made from a strange material and shaped to provide a full coverage of the hand and wrist. The metal is etched with many markings and runes. The knuckles of these gauntlets are rounded slightly to produce a medium of energy transfer, allowing for harder hits. These gauntlets are named after a mythical being named Manju of the Ten Thousand Hands, a martial artists being who is said to be able to strike a man 10,000 in the span of a moment. He was also famed for splitting the Rock of Ages, allowing the time of the Gods to end, and the time of Men to begin. Rares: Spoiler Greaves of the Ram God: Spoiler Name: Greaves of The Ram God Profession: Blacksmith Rank: 4 ID# 56272 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Heavy Armor Greaves Enhancements: (2/2) Heavy Momentum: When you miss, gain a +1 to base dmg. This can stack up to the amount of slots used. The +dmg goes away after a successful hit. Accuracy: Adds +1 to the BD, but cannot cause a critical hit. Description: A pair of armored graves named after the deity carved in it's metal. The wearer of this armor can be as stubborn and prone to fighting. Nimbus Light: Spoiler Name: Nimbus Light Profession: Blacksmith Rank: 3 ID# 55365 CD: 10 + 1 Quality: Rare Tier: 1 Item Type: One Handed Battle Axe Enhancements: (2/2) +1 damage, Accuracy +1 BD Description: A large one handed axe made of a fine ebony steel. Along it's blade are runic markings that glow green, having powdered minerals from the natural light crystals that form in Nimbus in them. The blade is sharpened to a honed edge and the weight of the weapon allows for better weilding. Carnwennan: Spoiler Name: Carnwennan Profession: Blacksmith Rank: 4 ID# 56625 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One Handed Rapier Enhancements: (2/2) Keen: On a successful attack, gain an additional +1 to your BD for each enchantment slot. This bonus does not stack with itself. This bonus goes away after landing a successful attack. (1 slot) Damage: +1 DMG. Description: A one handed rapier made of fine materials. The thin blade is sharp and durable, able to slice and stab with ease. The hand guard is a modified long sword crossguard with a secondary ring guard on the opposite sides of the crossguard, providing full protection to the user, but not limiting their grip or hand and arm movements. The blade is named for a legendary shortsword that was used to split a witch in 2 with one swing. Lord's Blade Gold Tracer : Spoiler Name: Lord's Blade Gold Tracer Profession: Blacksmith Rank: 4 ID# 56626 CD: 10 + 1 = 11 Quality: Rare Tier: 2 Item Type: One Handed Dagger Enhancements: (2/2) Bleed: Activated on a roll of 8-10. Deals (8 * Tier 2 = 16) damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (2 Slots) Description: A strange dagger made of fine ebony steel with a golden blade. The weapon has a wicked curve in it's length and the handle has a mirrored curve to match. The blade is so sharp and almost ethereal that it is said that one kiss of this weapon will cause the victim to bleed to death in mere minutes. Jeweled Tulwar of the Red Hawk: Spoiler Name: Jeweled Tulwar of the Red Hawk Profession: Blacksmith Rank: 5 ID# 57193 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One Handed Curved Sword Enhancements: (2/2) Keen: On a successful attack, gain an additional +1 to your BD for each enchantment slot. This bonus does not stack with itself. This bonus goes away after landing a successful attack. Every second tier step (tier 3, 5, 7 etc.) this will add a further +1 per slot. Damage: +1 DMG Description: A curved blade made from a fine material. It's curved blade is decorated with gold etched designs and jewels. The handle and Cross Guard are equally as decorated with precious gems. Despite the ostentatious look of the weapon, it is wickedly sharp and balanced perfectly to allow for a keen weapon. In the right hands, it can cleave a man in twain with little effort involved Axe of Despair: Spoiler Name: Axe of Despair Profession: Blacksmith Rank: 5 ID# 57303 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Two Handed Battle Axe Enhancements: (2/2) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 Slot) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 Slot) Description: A strange axe made of Ebony Steel set into a strange wooden handle. The blade is sharp and large, capable of biting deep and stunning an opponent. The handle is made of a twisted tree limb. A large knot sit at the top of the limb where the axe blade is connected to the handle. It's twisted and malformed shape resembles a face wailing in sorrow. Bara utsukushī sōn (Roses Stunning Thorn): Spoiler Name: Bara utsukushī sōn (Roses Stunning Thorn) Profession: Blacksmith Rank: 5 ID# 57412 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Katana Enhancements: (2/2) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 slot) Description: A Katana with a gorgeous hamon in in the shape of pointed thorns. The blade is deviously sharp and can cut to, and through, bone. The Tsuba is circular and has the etching of a rose's petals in the wind along it's surface. Whip of the Nine Tailed Fox: Spoiler Name: Whip of the Nine Tailed Fox. Profession: Blacksmith Rank: 5 ID# 57414 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One Handed Whip Enhancements: (2/2) Accuracy: Adds +1 to the BD, but cannot cause a critical hit. (1 Slot) Damage: Adds +1 base damage. (1 slot) Description: A whip made with of thick braided leather and a quicksilver core for strength. Near the top, the braid splits into nine seperate flails, each tipped with razor sharp tips that carve and strike at opponents flesh. The handle of the whip is made of a red cherry wood and has the engraving of a fox with nine tails upon it. Blade of the Red Sands Spoiler Name: Blade of the Red Sands Profession: Blacksmith Rank: 5 ID# 57812 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Katana Enhancements: (2/2) Accuracy: Adds +1 to the BD, but cannot cause a critical hit. Damage: Adds +1 base damage for every slot used. Description: A Katana made in the traditional manner. The hamon is shaped like the waving curves of sand dunes. The tsuba is made in a circular patter and has an etched desert scene inscribed upon it, red coloring from a powdered red gem added to make it stand out. The wrap is a white color, the Menuki shaped like tiny serpents. The scabbard is a red laquered cherry wood with brass collars and a matching white wrap. Hakon's War Axe Spoiler Name: Hakon's War Axe Profession: Blacksmith Rank: 5 ID# 57813 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Two Handed Battle Axe Enhancements: (2/2) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. Damage: Adds +1 Base Damage for every slot used. Description: A large axe made of a strange ebony material. It's black blade is flecked with red veins. It is named for the demonic warlord Hakon, slayer of kingdoms. The blade can not only cut people down, but has been known to streak a paralyzing fear within people, stopping them from defending themselves. Ritual Dagger Lostvayne: Spoiler Name: Ritual Dagger Lostvayne Profession: Blacksmith Rank: 5 ID# 58247 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One handed Dagger Enhancements: (2/2) Damage: +1 dmg per slot. (2 Slots) Description: A curves dagger that can pierce through any material. It has an aura of evil and taint from the many lives it has taken. Holy Spear Chastifull: Spoiler Name: Holy Spear Chastifull Profession: Blacksmith Rank: 5 ID# 58266 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One Handed Assault Spear Enhancements: (2/2) +1 DMG. Accuracy: +1 BD. Cannot cause criticals. Description: A holy spear made from a sacred tree hidden in the fairy king's forest. The blade is nearly a foot long, with twin guard blades at it's base. It is said the true wielder of this weapon can unlock it's hidden potention, turning it into a magical weapon capable of changing shape. Lightning Lance: Spoiler Name: Lightning Lance Profession: Blacksmith Rank: 5 ID# 58518 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Two Handed Assault Spear Enhancements: (2/2) +1 DMG. (1 Slot) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. Description: A large lance that is used in two hands. It has a shaft made of Ironwood the length of nearly 14 feet. It's blade is made from a resiliant ivory steel and is shaped in the manner of a lightning bolt. It can pierce through most armor, and even has the capability to paralyze a man in place. Yatagan: Spoiler Name: Yatagan Profession: Blacksmith Rank: 5 ID# 58611 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One Handed Curved Sword Enhancements: (2/2) Damage: +1 per slot. (2 Slots) Description: A large one handed curved sword that is nearly 5 feet long with a thick curve down it's length. It is sharp and can split through most materials. It's handle is shaped like a normal scimitar handle, but has a reverse curve in it and is long enough that it could be used in 2 hands. Paladin Mail: Spoiler Name: Paladin Mail Profession: Blacksmith Rank: 6 ID# 58777 CD: 9 + 1 = 10 Quality: Rare Tier: 2 Item Type: Heavy Armor Enhancements: (2/2) Mitigation Removes (9 * Tier Level 2) 18 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: Armor worn by the Holy knights who call themselves Paladins. They are defenders of the weak and righteous. Their armor is said to be imbued by the magical essence of their gods, and can deflect the strongest of attacks. Armor of Jeanne d'Arc: Spoiler Name: Armor of Jeanne d'Arc Profession: Blacksmith Rank: 6 ID# 58992 CD: 10 + 1 = 11 Quality: Rare Tier: 2 Item Type: Armor Enhancements: (2/2) Damage Mitigation: Removes (9 * Tier Level 2 * 2 slots) 36 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: A 13th century french style armor. It is made of Ivory Steel and chased with silver and and gold. The armor is adorned with small fluer de lis raised in gold. A row of silver chains lines the collar of the armor, and leather straps are used to hold the gauntlets to the pauldrons. Between the the two are chainmail links. Armor of The Phoenix Spoiler Name: Armor of The Phoenix Profession: Blacksmith Rank: 6 ID# 59142 CD: 10 + 1 = 11 Quality: Rare Tier: 2 Item Type: Armor Enhancements: (2/2) Mitigation: Removes (9 * Tier Level 2) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: A suit of armor made of a material that gives it the color of flames. Along the cuirass the metal is raised in the image of a Phoenix. The arms have feathered ornamentations along them, as do the legs. A flowing cape runs down the back, the collar, sides, and bottom are trimmed in feathers the color of the sun. Diclonii Vector Armor: Spoiler Name: Diclonii Vector Armor Profession: Blacksmith Rank: 6 ID# 59192 CD: 9 + 1 = 10 Quality: Rare Tier: 2 Item Type: Armor Enhancements: (2/2) Mitigation: Removes (9 * Tier Level 2) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: A set of armor that can deflect damage as if invisible hands move about it at all times, pushing the attacks aside Vector Whip: Spoiler Name: Vector Whip Profession: Blacksmith Rank: 6 ID# 59197 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Whip Enhancements: (2/2) Damage: Adds +(1 * Tier Level 1) base damage for every slot used. (2 slots) Description: A Whip make of 4 different braids. Each braid is made of a special quick silver steel that is flexible and jointed, allowing the whip to move and lash about with little exertion. The tips of the four braids are spiked with razor sharp clawed hands that slice and pierce anything they touch. Desolation's Claw: Spoiler Name: Desolation's Claw Profession: Blacksmith Rank: 6 ID# 59250 CD: 9 + 1 = 10 Quality: Rare Tier: 2 Item Type: One handed Dagger Enhancements: (2/2) Damage: Adds +(1 * Tier Level 2) base damage for every slot used. (2 Slots). Description: A one handed curved dagger that is honed to slice through most material. Hands of Ecthar: Spoiler Name: Hands of Ecthar Profession: Blacksmith Rank: 6 ID# 59195 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Armor (Gauntlets) Enhancements: (2/2) Unarmed Damage: Adds +(1 * Tier Level) base damage for every slot used. (2 Slots) Description: A pair of armored gauntlets that are made from a purple steel that are able to punch through stone and iron. Named for a famous knight who rode with Artorius, fabled king of Britannia. Axe of the Crocodile: Spoiler Name: Axe of the Crocodile Profession: Blacksmith Rank: 7 ID# 59308 CD: 9 + 1 = 10 Quality: Rare Tier: 2 Item Type: Two Handed Battle Axe Enhancements: (2/2) Damage: +(1 * Tier Level 2) base damage for every slot used. (1 Slot), Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 Slot) Description: A large axe made from a greenish material. The blade is shaped in a wedge shape, and has scaled patterns along the surface. the pommel of the blade is shaped like the head of a crocodile. Pilum: Spoiler Name: Pilum Profession: Blacksmith Rank: 7 ID# 59379 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One handed spear Enhancements: (2/2) Damage: Adds +(1 * Tier Level 1) base damage for every slot used. (2 Slots) Description: A light one handed spear used by ancient roman warriors. The blade is thin and long, able to skewer through armor, shield, and flesh. Spartan Shield: Spoiler Name: Spartan Shield Profession: Blacksmith Rank: 7 ID# 59383 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Shield Enhancements: (2/2) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 Slots) Description: A large round shield made of bronze and gold. This shield was used by ancient spartans to protect from all manners of attack, capable of withstanding arrows, spears, and even swords. it is said that a small group of soldiers with one of these each could make a wall that could fend off an army. Armor of Marco Polo: Spoiler Name: Armor of Marco Polo Profession: Blacksmith Rank: 7 ID# 59508 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Armor Enhancements: (2/2) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 Slots) Description: A set of armor made of a golden steel material. The front of the plate is decorated with a crimson red Fluer De Lys, and down along the sides and back are swirling patterns of lines and small chevrons. Along the arms are similar red Fleur De Lys and on the shoulders are chevrons. The armor is named for a famed adventurer and explorer. Sword of The Seven Stars: Spoiler Name: Sword of The Seven Stars Profession: Blacksmith Rank: 7 ID# 59586 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One Handed Straight Sword Enhancements: (2/2) Damage: Adds +(1 * Tier Level) base damage for every slot used. (2 Slots) Description: A european style sword made of an Ebony Steel material. The blade is nearly 5 feet in length, with a large fuller grooved down the middle of the blade, 7 large violet gems are set at intervals along the blade. The gems were harvested from fallen meteorites, giving the blade it's name. Blade of Longius: Spoiler Name: Blade of Longius Profession: Blacksmith Rank: 7 ID# 59670 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One Handed Straight Sword Enhancements: (2/2) Damage: Adds +(1 * Tier Level) base damage for every slot used. (2 Slots) Description: A roman style Gladius, The blade is wider than most and around 3 feet in length. it is sharpened on both sides, and can stab and cut well. Grand Wall: Spoiler Name: Grand Wall Profession: Blacksmith Rank: 7 ID# 59669 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Armor Enhancements: (2/2) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 Slots) Description: A set of armor made of grey steel. the armor is shaped well made and strengthened to provide protection. Bramble: Spoiler Name: Bramble Profession: Blacksmith Rank: 7 ID# 59667 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Shield Enhancements: (2/2) Thorns: X* (7 * Tier Level 1) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (2 Slots) Description: A shield made of steel with green chasing. along the edges, thorned vines of bramble wrap around it, giving it it's name. Etched Steel Armor Spoiler Name: Etched Steel Armor Profession: Blacksmith Rank: 7 ID# 59753 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Armor Enhancements: (2/2) Mitigation Removes (9 * Tier Level 1) 18 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: A set of steel armor made to withstand the worst of blows. This armor is etched with many swirls, grooved lines, and curls. Targe of the Blooded Spoiler Name: Targe of the Blooded Profession: Blacksmith Rank: 7 ID# 59748 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Shield Enhancements: (2/2) Thorns: Deals X * 14 (7 * Tier Level 1) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (2 slots) Description: A rounded shield made from wood and steel bands. Along the face, a large central rounded plate rests, with 4 radial spikes pointing out at angles, with a central 5th spike jutting out straight. Any who come to close to the shield will be spitted by one of the spikes. Kahn Armor Spoiler Name: Kahn Armor Profession: Blacksmith Rank: 7 ID# 59812 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Armor Enhancements: (2/2) Mitigation Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: A set of steel and fur lined armor made in resemblance of ancient eastern armor. the soulders, neck, and gloves, boots, and cap are all lined with fur from wolves, while the main pieces are a plated steel forged to cover the areas that are vital. Etched Shield Spoiler Name: Etched Shield Profession: Blacksmith Rank: 7 ID# 59814 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Shield Enhancements: (2/2) Mitigation Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Description: A steel and wooden shield that is of common rounded diamond shape. Front of the shield is covered in etchings and engravings of swirls and lines. Holy Shield Spoiler Name: Holy Shield Profession: Blacksmith Rank: 7 ID# 59820 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Shield Enhancements: (2/2) Regen: Heals you +9 per slot after every attack turn from your opponent on a CD roll of 6 or higher. (1 slot) Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage.(1 Slot) Description: A steel shield made in the shape of a large rectangle, a red cross painted down it. The shield is able to deflect blows while providing a small amount of health to it's user with every hit it takes. Thorn wall: Spoiler Name: Thorn wall Profession: Blacksmith Rank: 7 ID# 61912 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Shield Enhancements: Thorns: Deals X* (7 * Tier Level) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (2 Slots) Description: A wooden and steel shield made with the image of thorns encircling the edge. Each thorn is razor sharp and would harm anyone who touches them. Long Spear: Spoiler Name: Long Spear Profession: Blacksmith Rank: 7 ID# 61917 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One handed Spear Enhancements: Accuracy: +1 BD. Damage: +1 DMG Description: a steel and wooden spear, the blade is a foot long and sharp. the body is a steel reinforced wood carved with a circling fluted design. Uncommons: Spoiler Thorn's Song Spoiler Name: Thorn's Song Profession: Blacksmith Rank: 2 ID# 55186 CD: 10 (9 + 1) Quality: Uncommon Tier: 1 Item Type: One Handed Rapier Enhancements: (1/1 slots) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) Description: A rapier blade made of fine steel laced. It's blade is made primarily for quick deadly thrusts but has the ability to make small quick slashes. The blade can pierce deep through most materials, even some steel plating. When the blade moves, either via thrusts or slashes, it whistles with a high keen that sounds much like the flute's highest cord. The guard is a bell guard with a small engraved rose vine wrapping around it. The pommel is shaped in a stylized rose. Dragon Bone Cuirass: Spoiler Name: Dragon Bone CuirassItem Type: heavy armorTier: 1 Quality: Uncommon Enhancements: (1/1) HP Regen: Heals you +9 HP per slot after every attack turn from your opponent on a CD roll of 6 or higher.Description: A steel cuirass with a bone overlay made from dragon remains. The front plate is made from the upper skull of a dragon, the back plate made from overlaying shoulder bones. Spiked Gauntlets: Spoiler Name: Spiked Gauntlets. Profession: Blacksmith Rank: 4 ID# 56345 CD: 9 + 1 = 10 Quality: Uncommon Tier: 1 Item Type: Heavy Gauntlets Enhancements: (1/1) Unarmed Damage: Adds +1 base damage for every slot used. Description: A pair of steel hand guantlets with spiked knuckles. The spikes are made to focus the energy of the blow into specific points and do more damage. Woodsman's Axe: Spoiler Name: Woodsman's Axe Profession: Blacksmith Rank: 4 ID# 56950 CD: 9 +1 = 10 Quality: Uncommon Tier: 1 Item Type: One Handed Battle Axe Enhancements: (1/1) Keen: On a successful attack, gain an additional +1 to your BD for each enchantment slot. This bonus does not stack with itself. This bonus goes away after landing a successful attack. Description: A strong axe with great balance and structure. It allows for precise attacks, allowing the user to hit harder and more often. Grand Warhammer Gideon: Spoiler Name: Grand Warhammer Gideon Profession: Blacksmith Rank: 5 ID# 58246 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: One handed Warhammer Enhancements: (1/1) Damage: +1 dmg per slot. (1 Slot) Description: A bronze warhammer made to smite enemies. The large head has a normal flat surface on one side, and the other is a large curved spike. Kilij of the Desert Lords: Spoiler Name: Kilij of the Desert Lords Profession: Blacksmith Rank: 5 ID# 58262 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: One handed curved sword Enhancements: (1/1) +1 DMG Description: A bronzed steel curve sword that can slice and split through most materials. it's chased with silver along the blade and has rare jewels in the hilt. Viari's Dancing Sword: Spoiler Name: Viari's Dancing Sword Profession: Blacksmith Rank: 5 ID# 58318 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: One Handed Rapier Enhancements: (1/1) +1 DMG Description: A rapier made of light material. When in the hands of a skilled swordsman, the blade seems to dance of it's own accord. It is named for a famous bard named Viari. Silver Waraxe: Spoiler Name: Silver Waraxe Profession: Blacksmith Rank: 5 ID# 58375 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: One Handed Axe Enhancements: (1/1) +1 DMG (1 Slot) Description: A large axe made of silver. The blade is sharpened to such a degree that it could split through cord wood with little effort. Holy Maul of Tymora: Spoiler Name: Holy Maul of Tymora Profession: Blacksmith Rank: 5 ID# 58519 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: One Handed Warhammer Enhancements: (1/1) +1 damage Description: A large maul made from ivory steel. It is shaped much like a warhammer with one large flat faced side used for smashing and bashing. the second side of the weapon is shaped into a viscious tapered point that can pierce through shields, armor, flesh, and bone. Engraved in the flatsides of the head of the maul, and along the face of it, is the engraving of a womans face in profile with a coin on one side, and a four leaf clover on the other. This is the weapon for a paladin or cleric of the Goddess of luck, Tymora. The Sword of Talos: Spoiler Name: The Sword of Talos Profession: Blacksmith Rank: 5 ID# 58520 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: One Handed Sword Enhancements: (1/1) +1 DMG Description: A one handed sword. It's blade is straight and powerful, twin sides both having an edge along their length with a fuller down the flat of the blade from the tip of the blade to the crossguard. It's blade was nearly a palm and a half in width, and nearly a finger thick. The crossguard is made in the shape of a dragon with it's wing spread for the guard. It's tail formed the handle, and it was made to show the scaling down it's length. The pommel of the sword was a large claw grasping a red jewel. Arming Knife: Spoiler Name: Arming Knife Profession: Blacksmith Rank: 5 ID# 58699 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: One handed Dagger Enhancements: (1/1) Damge +1 Description: A knife used in close quarters and typically found alongside a longsword or rapier. It is used as a blocking tool most time, but alone can be used to quick thrusts and slices to the opponent. Estoc: Spoiler Name: Estoc Profession: Blacksmith Rank: 6 ID# 58775 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Rapier Enhancements: (1/1) +1 DMG Description: A rapier made of fine steel. It's thin blade is powerful and can pierce through armor and flesh in one thrust. Dragon Plate: Spoiler Name: Dragon Plate Profession: Blacksmith Rank: 6 ID# 58778 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: heavy armor Enhancements: (1/1) Removes (9 * Tier Level 1) 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Description: A set of armor made to resemble to scales of dragons. It is durable and can protect the wearer from damage. Musketeer Blade: Spoiler Name: Musketeers Blade Profession: Blacksmith Rank: 6 ID# 58898 CD: 7 + 1 = 8 Quality: Uncommon Tier: 2 Item Type: Rapier Enhancements: (1/1) Damage: +1 DMG Description: A well designed rapier made in the style of a 15th century French Musketeers. It's bell guard is shaped with a mixture of a basket hilt as well, the blade long and thin. It was made to thrust and pierce armor and flesh. Serated Cleaver: Spoiler Name: Serated Cleaver Profession: Blacksmith Rank: 6 ID# 58995 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Two Handed Long Sword Enhancements: (1/1) Damage: +1 DMG (1 Slot) Description: A large two handed cleaver with large serated teeth. It can saw a man in half with one swing. Rebound shield Spoiler Name: Rebound shield Profession: Blacksmith Rank: 6 ID# 59194 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Shield Enhancements: (1/1) Thorns: Deals X* (7 * Tier Level 1) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. Description: A shield made of steel that is said to rebound any damage back to the one who struck it. Rebound Armor Spoiler Name: Rebound Armor Profession: Blacksmith Rank: 6 ID# 59198 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Armor Enhancements: (1/1) Thorns: Deals X* (7 * Tier Level) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. Description: A set of armor made of steel. It is said that it will reflect any damage back to the one who struck it. Johnny Corkscrew: Spoiler Name: Johnny Corkscrew Profession: Blacksmith Rank: 7 ID# 59302 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: One handed long sword Enhancements: (1/1) Damage: Adds +(1 * Tier Level 1) base damage for every slot used. Description: A Straight bladed cutlass made of a a strong steel. It is named for a fabled pirate who use a blade like this to hunt the dnizens of a land that never age. Shield of the Lost Boys: Spoiler Name: Shield of the Lost Boys Profession: Blacksmith Rank: 7 ID# 59305 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: shield Enhancements: (1/1) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Description: A shield made from a strange wooden material that can stop even the most powerful blow from a steel weapon. Blade of Pan: Spoiler Name: Blade of Pan Profession: Blacksmith Rank: 7 ID# 59307 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: One handed Dagger Enhancements: (1/1) Accuracy: Adds +1 to the BD, but cannot cause a critical hit. Description: A strange dagger that is light as air. It's been rumored to be used by a strange fairy who does not age. Steel Plate Armor: Spoiler Name: Steel Plate Armor Profession: Blacksmith Rank: 7 ID# 59376 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Armor Enhancements: (1/1) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Description: A set of armor that is made of steel plates interwoven and connected together to create proper armor that will stop a blow. Bearded Axe: Spoiler Name: Bearded axe Profession: Blacksmith Rank: 7 ID# 59678 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: one handed axe Enhancements: (1/1) Damage: +1 Description: A basic axe with a large blade the has an extended length towards the bottom of it. This item has been used by Norse warriors, Headsman, and others for centuries. Javelin: Spoiler Name: Javelin Profession: Blacksmith Rank: 7 ID# 59675 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: one handed spear Enhancements: (1/1) Accuracy: +1 BD Description: a spear of great length, this weapon has been known to be used by many armies, being thrown to great effect. Laquered Armor: Spoiler Name: Laquered armor Profession: Blacksmith Rank: 7 ID# 59674 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: armor Enhancements: (1/1) Thorns: X* (7 * Tier Level 1) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. Description: a set of armor made from laquered steel tiles with thick chainmail beneath it for added protection Kite Shield: Spoiler Name: Kite Shield Profession: Blacksmith Rank: 7 ID# 59672 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Shield Enhancements: (1/1) Damage Mitigation: Removes (9 * Tier Level 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Description: A shield shaped in the classical rounded diamond shape, this shield is light and used to block and parry attacks, allowing for the user to then strike and move back. Cutter: Spoiler Name: Cutter Profession: Blacksmith Rank: 7 ID# 59671 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: Dagger Enhancements: (1/1) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level 1) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (1 Slot) Description: A serated blade alittle over 1 foot in length, the dagger can cut deep, tearing veins and arteries into shreds. Chain Striker Spoiler Name: Chain Striker Profession: Blacksmith Rank: 7 ID# 59749 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: Whip Enhancements: (1/1) Damage: Adds +(1 * Tier Level 1) base damage for every slot used. Description: A whip made of a flexible quicksilver material and latticed with chained links that run up it's length. At the tip, a sharpened steel spike is connected to the linked chain, allowing for it to move and flow through the air and along a target, causing more damage when it strikes. Honed Kukri Spoiler Name: Honed Kukri Profession: Blacksmith Rank: 7 ID# 59752 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: Dagger Enhancements: (1/1) Damage: Adds +(1 * Tier Level 1) base damage for every slot used. Description: A well made and sharpened knife with a semi curved blade to it, the Kukri has a thin lower blade, then curves into a thicker, rounded blade edge. Manticore Tail Spoiler Name: Manticore Tail Profession: Blacksmith Rank: 7 ID# 59816 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Whip Enhancements: (1/1) Damage: +1 Damage per slot. Description: A set of flexible chain linked together and braided with other links to provide a deadly whip of heavy metal. At the end of the chain is a small spiked sphere hangs, providing a point to grab and tear flesh. Greatsword Spoiler Name: Greatsword Profession: Blacksmith Rank: 7 ID# 59818 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: Two Handed Striaght Sword Enhancements: (1/1) Damage: +1 Damage per slot. Description: A large 2 handed sword made of steel. The blade is as long as a mans palms laid side by side. The edges are sharp and well made to allow for precise cuts. The handle is nearly 1.5 feet long, and the blade reaches a 6 feet in length from crossguard to tip. Shiv Spoiler Name: Shiv Profession: Blacksmith Rank: 7 ID# 61060 CD: 7 + 1 = 8 Quality: Uncommon Tier: 1 Item Type: Dagger Enhancements: (1/1) DMG: +1 DMG Description: A small basic dagger. the blade is thing and long, with a slight triangular shape to it. the handle is also rounded and unguarded. This weapon is used more for stealthy back stabs than face to face combat. Tulwar: Spoiler Name: Tulwar Profession: Blacksmith Rank: 7 ID# 61916 CD: 8 + 1 = 9 Quality: Uncommon Tier: 1 Item Type: One Handed Curved Sword Enhancements: Damage: +1 DMG Description: a strange curved sword of middle eastern design. the blade almost turns back on itself due to the large curve. Tools: Spoiler Hammer of Weyland: +1 CD Spoiler Name: Hammer of Weyland Profession: Blacksmith Rank: 5 ID# 57194 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Tool Enhancements: (3/3) Crafting Die: Adds +1 to the CD when crafting in a shop. (Uses all 3 slots) Description: A black hand hammer shaped in a hexagonal pattern. Along the many faces of the hammer gleam red and gold veins that imbue the hammer with strength and precision of hits. This hammer is named for the famed God of Blacksmiths and Soliders. Jewelry Loop: Spoiler Name: Jewelry Loop Profession: Blacksmith Rank: 7 ID# 59310 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Tool Enhancements: (3/3) Crafting Die: Adds +1 to the CD when crafting in a shop. Description: A small rounded brass tube that is tapered at one end with a small crystal lense, and flared at the other with another larger crystal lens. Looking through the small lens magnifies sight and would be best used by tailors and artisans. Mortar and Pestle: Spoiler Name: Mortar and Pestle Profession: Blacksmith Rank: 7 ID# 59589 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Tool Enhancements: (3/3) Crafting Die: Adds +1 to the CD when crafting in a shop. Description: A small crystal bowl with steep rounded edges. The inside of the bowl has a grainy texture to help grab the materials being ground. Resting inside the mortar is a long rod made of a similar crystal, thin enough on one end to fit in a persons hand, the other end is bulbous and wide, with a slightly rounded edge to be used to grind materials against the bowl. This item can be seen in use by many different crafters, from cooks to alchemists, smiths to tailors. Reserved: Spoiler Ripper Knife: Shino Spoiler Name: Ripper Knife Profession: Blacksmith Rank: 7 ID# 61910 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: One Handed Dagger Enhancements: Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (2 Slots), Damage: +(1 * Tier level) DMG (1 Slot) Description: A viscous blade made to fit the hand perfectly. It is properly made so that it has the best balance between handle and blade. Along the blade, a blood groove is carved down it to the handle. The handle is black ivory, polished and chased with brass rivets. Funds: Spoiler Mats: 23 Mats Funds: 13253 Col. Custom orders: Custom orders are subject to special pricing outside of normal rates. The reason for this is simple. It can take time to get the quality asked for as rolls are random, and it can take material to create, and I may have already used my # of crafts for the day when order is placed.. For this reason, if a customer order is wanted, please PM ME FIRST and we can work on price and details. Custom orders can take some time to fill. Please be patient. For custom orders, please PM me with the general info (item type, quality, enhancements/how many per slot, etc) and we can work out the price. I am not adverse to bartering if the pricing is reasonable. (IE: Do not ask for a Perfect quality T2 item for 500 col or 5 mats... Rule of thumb, do not go below HALF the price I normally ask for. You will be denied.) ORDER FORM: Fill this out for any custom order and post it IC in the thread. Spoiler Name: (Give it a title) Profession: Blacksmith Rank: 7 ID# leave blank CD: Leave blank Quality: (Bad, Good, Uncommon, Rare, Perfect.) Tier: 1 or 2 Item Type: (add weapon type) Enhancements: (What you want on the item and how many slots) Description: (Describe what you want. Give it some fluff/lore.) Edited July 12, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Ratatosk 0 Posted April 1, 2016 #2 Report Share Posted April 1, 2016 Dropping off some mats -13 Mats +13 Mats to Nikodemus Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 1, 2016 Author #3 Report Share Posted April 1, 2016 (edited) "Why thank you so much Ratatosk." Taking the materials and placing them in there respective places, Nikodemus then returns to the main counter with a smile. "Thank you once again for the materials Ratatosk. If you need anything, please feel free to ask. I am always happy to lend my skills to you." +13 Mats Edited April 4, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 1, 2016 Author #4 Report Share Posted April 1, 2016 (edited) Waking up from a nap, Nikodemus decided to start off by crafting some items. Ratatosk had brought him some materials to resupply his dwindling stocks, and he was greatful for that. Going into his forge, he began to work. His first attempt at forging something turned into a lump of warped useless steel and he ended up discarding it as there was no possibility of salvaging anything from the failed attempt. His second attempt gave him a bit better results, but not enough. The item was a bad quality dagger. It's blade was too soft and would go dull and break after 1 or 2 uses in any real combat. There was once again little chance of anything to be salvaged, so he tossed the dagger onto the nearby table to be disposed of later with the other bad item he had made a couple days back. With a sigh, Nikodemus decided to rest for a moment and collect his thoughts. Brushing his hand across the the small Weyland Plushie he had gotten the other day, Nikodemus smiled and decided to give it one shot. Returning to the forge, Nikodemus took up his hammer and began to work on a new item. After working on the new item, he smiled as it came out perfect. Taking it to the finishing table, Nikodemus engraved it and worked in some precious stones and gold filigree. Satisfied with the item, he then wrapped it in a silk cloth and took it to be evaluated. ID# 54696 results: Perfect item. -1 mat Craft: 12 + 1 = 13 ID# 54697 results: Bad item, -1 mat. Craft: 5 + 1 = 6 ID# 54698 results: fail. no item. -1 mat Craft: 2 + 1 = 3 EXP earned: 8 + 1 + 1 = 10. Edited April 1, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 7, 2016 Author #5 Report Share Posted April 7, 2016 Having been out and about, Nikodemus had returned from slaying a Dark Elf and decided to do some crafting the next morning. He went into his forge and began working hard. The first item to come out was terrible. He tossed it without care. The second was a bad iron item, so he salvaged what he could and moved onto the next item. Forging out a good 2-handed War Axe, Nikodemus smiled and set it aside with the other basic items he had made to be placed in his shop. His last forge attempt produced a perfect set of Heavy armor. This was his best set yet, and would be his own personal one. Setting it with runes made from powdered crystals found in Nimbus, it gave the etchings an eerie green glow. He then wrapped them up and took the off to be evaluated. Rolls: Spoiler Name: Plague Knight Armor Profession: Blacksmith Rank: 3 ID# 55739 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Heavy Armor Enhancements: (3/3) Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you. Regen: Heals you +9 HP per slot after every attack turn from your opponent on a CD roll of 6 or higher. Description: A set of black steel armor, covered in glowing green runes made with the powdered crystals from Nimbus to give it's luminescence. The armor is spiked and forged with sharp edges to cause harm to any enemy foolish enough to get too close. The material is a refined ebony steel, allowing for it to be durable and protect the wearer. -1 mat, +1 item Name: Steel War Axe Profession: Blacksmith Rank: 3 ID# 55741 CD: 6 + 1 = 7 Quality: Good Tier: 1 Item Type: Two Handed Battle Axe Enhancements: none Description: A basic design 2-handed War Axe. It's twin heads are razor sharp and can cleave through most things with ease. It's long haft is made of reinforced Ironwood. -1 mat, +1 item ID# 55738 Craft: 3 Loot: 16 Saved mat. no item, no mat used 1 attempt failed -1 mat - 3 mats, + 2 Items, +12 EXP. Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 8, 2016 Author #6 Report Share Posted April 8, 2016 (edited) Needing to get some work done for the day, Nikodemus went into his forge and began to work at crafting some new items. His first 2 attempts failed spectacularly and he was unable to salvage any materials from the now solidified lumps of metal slag. With a sigh, he hurled the chunks into a refuse chute, which would be emptied later that day into a nearby hole that lead deep into the mountains depths. Returning to his work, Nikodemus then forged a nice Kite Shield made of steel. The quality was good, but he wasn't able to do much with it. He would set it aside as a starter item, and would offer an engraving on free of charge if someone wanted to personalize it later. He went and set it onto the counter to be wrapped and taken for evaluations later. Returning to his forge for the last attempt of the day, Nikodemus decided to craft another sheild using some of the left over materials he had gotten from slaying a Dark Elf recently. The dragon scales would provide a unique look and hardness to the shield. Working it out into a nice, long tower shield, he was happy with the look and perfection of it upon completing it. The scales were inlaid into the steel and it was raised to create a nice snug fit to them. Wrapping the newest batch of items, Nikodemus left for evaluations. Rolls: Spoiler ID# 55903 results: fail -1 mat, 1 EXP Craft: 1 +1 = 2 ID# 55908 results: Good item -1 mat, +1 item, 2 EXP Craft: 5 + 1 = 6 ID# 55909 results: fail -1 mat, 1 EXP Craft: 1 + 1 = 2 ID# 55910 results: Perfect -1 mat, +1 item, 8 EXP Craft: 12 + 1 = 13 Overall Results: - 4 materials, + 2 items, 12 EXP towards Blacksmith rank. Items info: Spoiler Name: Scales of the Dragon God. Profession: Blacksmith Rank: 3 ID# 55910 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Shield Enhancements: (3/3) Damage Mitigation: Removes +18 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Thorns: Deals X*7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (1 slot) Description: An ornate tower shield, made of an ebony steel and laced with dragon scales. Where the scales are, the metal of the ebony steel has been raised around them to ensure a strong fitting and lessen the chance of the scales being broken off by repeated blows. Due to the mixture of strong steel and the hardness of the dragon scales, the shield can take the strongest of attacks and keep the wearer safe from harm. A bonus to having the scales inlaid into the metal is that they have a sharpness to them that will cut and harm any who get to close to the shield. Name: Steel Kite Shield Profession: Blacksmith Rank: 3 ID# 55908 CD: 5 + 1 = 6 Quality: Good Tier: 1 Item Type: Shield Enhancements: None Description: A standard 2 foot long, 1 foot wide, kite shield made of basic steel. The front face is blank and can be engraved for no cost to include a personal insignia or guild crest. The handle is an over-arm handle wrapped in leather. 2 Craft attempts, ID# 55903 and ID# 55909, failed with CD of 1. Edited April 8, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 11, 2016 Author #7 Report Share Posted April 11, 2016 (edited) Wandering into his shop after a long weekend, Nikodemus smiled and decided to get to work. Walking into his forge, Nikodemus lifted a few pieces of his dwindling materials pile and went to the forge. Working on the first one, Nikodemus felt the metal slip occasionally and realized he was striking it at the wrong angle. With a sigh, he looked at the piece and realized it was going to come out bad. Not wanting to let it go to waste, Nikodemus worked it as best he could into a simple dagger, but it would be relegated to the same bin as the others of it's quality. His next 2 attempts went better for him. He first forged a nice pair of gauntlets that were of a good quality and would suit any starting player. The second item he forged was a one handed assault spear. He forged the blade of the spear into a nice length and then sharpened it before attaching it to a wooden haft made of Ebony Ironwood. It too was of a good quality. His 4th attempt was a step above the rest, and he smiled as he worked the material. It was one he hadn't attempted to use yet. The material was a Silver Ivory, and when shaped right it looked like it glowed even in the darkness. Shaping it into a pair of heavy armored greaves, Nikodemus worked hard to make it just right. Seeing a way to raise the material into an image, he did so, raising the metal along the front and down the sides of the legs. Nikodemus took it to the finishing bench, and etched in the finer details, and then engraved swirls and lines along the legs of the armor. Happy with the end result, Nikodemus set it aside with the others and then went to his forge one last time. Taking the final material he selected, Nikodemus worked the item on his anvil for a good while, taking great care that the shape stayed true and straight, the material never wavering below it's optimal temperature. After working for nearly an hour, Nikodemus stepped back and let out a breath of relief. His newest item, a Two Handed Straight Sword, was done. It's long blade was wide and long, it's length etched with glowing runes made of powdered crystals he had access to in Nimbus. The blade was a perfect item and Nikodemus was happy he had crafted it. Taking the items, He wrapped them all and left his shop for evaluation. Rolls: Spoiler ID# 56268 results: bad Craft: 3 + 1 = 4 ID# 56269 results: good Craft: 5 + 1 = 6 ID# 56270 results: perfect Craft: 11 + 1 = 12 ID# 56271 results: good Craft: 7 + 1 = 8 ID# 56272 results: rare Craft: 10 + 1 = 11 18: EXP earned. Items: Spoiler Name: Greaves of The Ram God Profession: Blacksmith Rank: 4 ID# 56272 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Heavy Armor Greaves Enhancements: (2/2) Heavy Momentum: When you miss, gain a +1 to base dmg. This can stack up to the amount of slots used. The +dmg goes away after a successful hit. Accuracy: Adds +1 to the BD, but cannot cause a critical hit. Description: A pair of armored graves named after the deity carved in it's metal. The wearer of this armor can be as stubborn and prone to fighting. Name: Blade of Erebus Profession: Blacksmith Rank: 4 ID# 56270 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Two Handed Straight Sword Enhancements: (3/3) Damage: Adds +2. (2 slots), Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) Description: A large 2 handed sword. It's broad blade is etched with runes that glow with a natural fire due to the crystals that were powdered and added to the metal. It is sharp and powerful, being able to slice an opponent so deep they will be maimed for life, if they survive the wound. Name: Pilum Profession: Blacksmith Rank: 4 ID# 56271 CD: 7 + 1 = 8 Quality: Good Tier: 1 Item Type: One Handed Assault Spear Enhancements: None Description: A basic spear with a wooden haft and a long, thin blade used to penetrate armors. This weapon has been used as both a thrusting spear, as well as a throwing spear. Name: Steel Gauntlets Profession: Blacksmith Rank: 4 ID# 56269 CD: 5 + 1 = 6 Quality: Good Tier: 1 Item Type: Heavy Armor Gauntlets Enhancements: none Description: a pair of armor designed to protect the hands. They are full coverage and made of durable steel. Name: Iron Dagger Profession: Blacksmith Rank: 4 ID# 56268 CD: 3 + 1 = 4 Quality: Bad Tier: 1 Item Type: Dagger Enhancements: None Description: a plain iron dagger that barely holds a good edge. -5 materials, +5 items. Edited April 11, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 12, 2016 Author #8 Report Share Posted April 12, 2016 (edited) Having returned from completing a quest and getting some new materials, Nikodemus went to work forging new items. After working for a bit, he realized he had screwed the first item up and made a bad item. Thankfully he was able to salvage the materials and reforge it into something new. Working for even longer, he finished with a steel great helmet. Setting it aside, he resumed working on a new item. After working the material, he decided on a pair of gauntlets. Finishing them he was happy with the spiked knuckles and how they looked. The next item he made was a Katana. The blade was of a fine make and would stand up against many opponents. The blade, menuki, handle, tsuba, and scabbard were all well made and beautiful. Sheathing the blade into the scabbard and set it with the other items. Lastly, Nikodemus turned and began to forge himself a new war axe. Working Ebony Steel with some of the powdered crystals, Nikodemus forged a brute of a weapon. The black blade was etched with many of the glowing green runes, and they stretched down the handle as well. The ornamentation was not too ostentatious, nor was it lacking either. The weapon would be balanced perfectly, sharp, and lethal to enemies. Finishing the weapon, Nikodemus took it and the others for Evaluation. Rolls: Spoiler ID# 56343 results: bad Craft: 3 + 1 = 4 Loot: 15 salvaged mat ID# 56345 results: uncommon -1 mat +1 item Craft: 9 + 1 = 10 ID# 56346 results: Perfect -1 mat +1 item Craft: 12 + 1 = 13 ID# 56347 results: Perfect -1 mat +1 item Craft: 11 + 1 = 12 ID# 56348 results: Good -1 mat +1 item Craft: 7 + 1 = 8 Overall Results: 22 EXP, +4 items, -4 mats. Items: Spoiler Name: Steel Great Helm Profession: Blacksmith Rank: 4 ID# 56348 CD: 7 + 1 = 8 Quality: Good Tier: 1 Item Type: Heavy Armor Helmet Enhancements: None Description: A basic steel helmet, shaped like a Crusader's Great Helm from the mid-13th century. Lacking adornment and symbols, it is a simple vanity item that can be worn with other heavy armor. Name: Spiked Gauntlets. Profession: Blacksmith Rank: 4 ID# 56345 CD: 9 + 1 = 10 Quality: Uncommon Tier: 1 Item Type: Heavy Gauntlets Enhancements: (1/1) Unarmed Damage: Adds +1 base damage for every slot used. Description: A pair of steel hand guantlets with spiked knuckles. The spikes are made to focus the energy of the blow into specific points and do more damage. Name: Umi no tamashī (Soul of the Sea) Profession: Blacksmith Rank: 4 ID# 56347 CD: 11 + 1 = 12 Quality: Perfect Tier: 2 Item Type: Katana Enhancements: (3/3) Damage: Adds +(1 * Tier Level = 2) base damage for every slot used. (1 Slot) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level = 16) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (2 slots) Description: A large Katana made of a good material. It's blade has a gentle curve in it's spine, making it perfect for slashing. The hamon is in a pattern much like roiling waves in the ocean. A fuller runs down the length of each side and touched near the tang. The handle is made of Ironwood and wrapped in a type of mob skin similar to rayskin. The wrap is made of a fine black material, with 2 silver menuki in the shape of a skull with bones beneath it. The Scabbard is made of polished Ebony Ironwood and decorated with a similar wrap and 2 brass collars at each end. The tsuba is made of similar silver as the Menuki' and has an etching/engraving of a sun behind clouds and three small birds flying. *see image. Name: Plague Knight's Battle Axe. Profession: Blacksmith Rank: 4 ID# 56346 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: One Handed War Axe Enhancements: (3/3) +1 damage, Accuracy: +1 BD, Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals 8 of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) Description: A black axe with a rust colored blade. Green runes glow on it's blade and haft, a trademark of the Blacksmith who crafts it using Nimbus naturally glowing green crystals as a material in forging. It is sharp, well balanced, and lethal in the right hands. Katana Images for Reference: Spoiler Menuki Sword itself Tsuba, but it is Silver Edited April 13, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 13, 2016 Author #9 Report Share Posted April 13, 2016 (edited) Waking up for the day, Nikodemus decided to do some smithing first before leaving. Stoking the forge, Nikodemus went to work and forged out a billet. After working the item for a time, he realized the forge wasn't at optimal head and the billet had become useless iron with many impurities in it. Tossing it aside, Nikodemus grabbed a new set of materials and began forging it. Working it, he made a good quality dagger and forged it to shape to be a well versed pairing dagger. His next attempt at forging wasn't so good. He forged a billet for a bit and realized it was mainly iron. Working it as best as he could, he eventually had a warhammer on his hands. Something to be tossed with the others. His next item came out well. He created a nice pliable material and then wound and braided it in a supple material, creating a bull whip. The handle he made to accommodate varying grips for different strikes and cracks of the whip. His last attempt came out best of all. He worked a piece of strange material he had into a helmet. The nasal guard visor was curved slightly and looked like a menacing ice cutter blade he saw ships attach to their hulls during winter. The material cooled to an ash colored grey with hints of black steel beneath it. Taking it to the finishing bench, Nikodemus riveted some fur lined leather to the neck, and then attached a sash plume to the top. Looking at the finished helmet, Nikodemus swore he could see pulsing red veins of hot metal all around the helmet, but it was cool to the touch. Attributing it to the material, he smiled and was happy with the finished product. Taking the items, he left for evaluation and locked his shop. Rolls: Spoiler ID# 56433 results: Good -1 mat, +1 item Craft: 6 + 1 = 7 ID# 56434 results: Perfect -1 mat, +1 item Craft: 12 + 1 = 13 ID# 56435 results: Bad -1 mat, +1 item Craft: 3 + 1 = 4 ID# 56437 results: Fail -1 mat Craft: 1 + 1 = 2 ID# 56438 results: Good -1 mat, +1 item Craft: 5 + 1 = 6 Overall Results: -5 materials, +4 items, 14 EXP earned. Items: Spoiler Name: Iron War Hammer Profession: Blacksmith Rank: 4 ID# 56435 CD: 3 + 1 = 4 Quality: Bad Tier: 1 Item Type: One Handed War Hammer Enhancements: none Description: A bad quality iron warhammer. The item looks as if a squared iron billet was hammered abit here and there to round the edges ever so slightly. The haft is a piece of tough ironwood, with a metal core running down it for stability. Rivets and iron bands can be seen holding the head and tang to the haft of the weapon. Name: Pairing Dagger Profession: Blacksmith Rank: 4 ID# 56433 CD: 6 + 1 = 7 Quality: Good Tier: 1 Item Type: One Handed Dagger Enhancements: None Description: A blade made of good strong steel. The blade is just under 12 inches long, with a width starting at 6 inches in near the handle and tapering off to 2 inches at the tip. The crossguard of the blade was made with an exaggerated curve to it in order catch the enemy blade and redirect it. a large ring encircles the handle also, protecting the users hand even more from an enemies blade. Name: Bull Whip Profession: Blacksmith Rank: 4 ID# 56438 CD: 5 + 1 = 6 Quality: Good Tier: 1 Item Type: One Handed Whip Enhancements: None Description: A well made whip. The tip of it is made of a durable material that provides the best strike, digging deep and scoring the target well. The braid of the whip is woven just right and lines with a flexible core to provide strength. The handle is shaped to fit the users hand perfectly and allow for multiple grips to provide the right amount of force needed to use the weapon. Name: Helmet of the Ashen Profession: Blacksmith Rank: 4 ID# 56434 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: Heavy Armor Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier 2 = 18 * 2 = 36) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots) Regen: Heals you +(9 * Tier 2 = 18) per slot after every attack turn from your opponent on a CD roll of 6 or higher. (1 slot) Description: A helmet made of the best steel. The helmet is shaped in to fit perfectly on the wearers head. It's visor is slightly exaggerated and and curved to form an angled nasal guard. Along the neck of the helmet, a grey lining of fur is attacked to leather and riveted to the metal. The main top of the helmet has a sash plume that hangs down to the base of the neck. The steel is of a mottled, almost ash grey with hints of black steel in some places. A tiny veins of pulsing red can been seen faintly along the helmet as if the metal was still hot from forging. Edited April 13, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Khrysaor 0 Posted April 14, 2016 #10 Report Share Posted April 14, 2016 Khrysaor just teleported from The Town Of Beginnings on the 1st floor to the 7th. He looked around the floor in curiosity, this being his first time stepping foot on the seventh floor. His first thought was, 'This place looks to dull for my tastes. I like the floor I set up shop, really it was an exciting day because I have just opened up shop today, and I am going to get a awesome set of Heavy Armor today. Finally, the deal has been finalized and the owner of The Cracked Crucible, I think it was Nikodemus, said I could come in today to buy it off his store.' He walked down the stone pathway until he came upon the blacksmith's store he was looking for. It was 2 floors and looked pretty much exactly the same as the other buildings around it. It was made from grey stone, Khrysaor walked up to the door and opened it. A ringing of the bell can be heard signalling the front door opened. He looked inside and seeing all the display cases with awe. Some of the items truly looked fantastic and well-made. He hoped he could soon gain this type of experience to make items as well as these. Khrysaor noticed Nikodemus was rearranging the armor on display and seemed to be unhooking a armor set. He looked at Nikodemus and said, "Hey, how are you doing, Nokodemus? My name is Khrysaor we been communicating through message about a set of heavy armor. It was The Cuirass of the Iron Wall, and we agreed on the price. 850 Col. and 2 Mats, right?" Khrysoaor's JOURNAL | The Shield and Sword Emporium STATS Hide contents STATS LEVEL 4 HP: 16/16 ENERGY: 4 DAMAGE: 1 ACCURACY: 0 MITIGATION: 0 Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 14, 2016 Author #11 Report Share Posted April 14, 2016 Adjusting a few things here and there to make room for the next set of items that had just been approved, Nikodemus heard the door to the shop open. He was in the process of taking down a set of armor when he heard the young man speak. Turning to greet his customer, Nikodemus smiled politely and nodded. "Ah, Herr Khrysaor, Yes I am doing well. Call me Niko. Everyone else does. Cept Mack, he calls me Nutter. Anyways, yes I do recall the transaction. 850 Col and 2 mats was the deal for the armor <Cuirass of the Iron Wall> and I have it ready. Nice and polished up for you too. Lemme grab it." With that, Nikodemus slid behind the counter and removed a large cloth wrapped item. Opening the cloth, he revealed <Cuirass of the Iron Wall>. The whole Cuirass was shaped to provoke images of wall protecting a village. The curved edges of the plates and spiked linings here and there showing off a more deadly side to it. "Here you go good sir. If you'll just accept the trade via the shop screen here--" Nikodemus opened a menu and then selected the shop screen and entered the armor through it so that Khrysoar could take ownership. "--and then exchange payment of course, then you will be the new owner of this fine armor." Quote Report Link to post Share on other sites
Khrysaor 0 Posted April 15, 2016 #12 Report Share Posted April 15, 2016 'Nutter, well that is some nickname,' thought Khrysaor. He was trying to hold in his snicker, and was able to say with a straight face, "Ok, then Niko. You should call me Khry, my name is hard to pronounce so others have given me this name instead." Khrysaor took a glance at the armor and knew he made a good deal, the work was good condition. Shape looked perfect, and fine tuned, no roughness to it. He happily accepted the transaction of Col. and Mats. on the shop screen for the Heavy Armor. He saw little animated picture of Gold coins and ore like material transferring from himself to the shop on the shop screen, and in turn the armor coming from the shop to himself. After, the transaction was completed a pop-up signaled that the trade was compete. <Cuirass of the Iron Wall> was in his inventory now. "Thank you, again. It is a good piece of armor and I will treasure it since it is my very first buy and armor." He put out his hand for Niko to shake. After, shaking hands and saying a last few parting words, Khrysaor walked to the door, but before he left, he said, "You should come up to Floor 8 and see my new shop I just opened it up today, its called The Shield and Sword Emporium. But don't know how much use it will be to you because I am a blacksmith, too. You are much better than me and more experienced. Still, if you want to hang out come on up and check it out. Bye, see you again sometime,, and thanks." With that Khrysaor left The Cracked Crucible. Bought: Spoiler Name: Cuirass of the Iron Wall Quality: Rare Tier: 1 Item Type: Heavy armor Enhancements: (2/2) Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage (1 Slot). Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used (1 Slot). Description: The whole Cuirass was shaped to provoke images of wall protecting a village. The curved edges of the plates and spiked linings here and there showing off a more deadly side to it. Paid: Spoiler 850 Col. & 2 Mats. Khrysaor's JOURNAL | The Shield and Sword Emporium STATS Hide contents STATS LEVEL 4 HP: 16/16 ENERGY: 4 DAMAGE: 1 ACCURACY: 0 MITIGATION: 0 Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 15, 2016 Author #13 Report Share Posted April 15, 2016 After the transaction had happened, Nikodemus smiled and shook hands with the young man before him. "I will stop by. I enjoy seeing other smiths works and forges. Keeps my mind together." Bidding farewell, Nikodemus watched as Khrysaor left. He then returned to adjusting the racks and organizing things. Shortly after, He set the new materials he had gotten from the trade with the others in his forge and lined them all up in the correct piles. Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 15, 2016 Author #14 Report Share Posted April 15, 2016 (edited) Having spent most of his time out hunting materials yesterday, Nikodemus hadn't done any forging, so his forge's fire had cooled down a bit. Taking some coal and kindling, Nikodemus restoked the forge, using his right leg to pump the foot peddle of his bellows up and down, forcing air into the forge beneath the coals and kindling to make it burn at a greater heat. Repeating the process of adding coal and some kindling while stoking the forge with the bellows, Nikodemus waited for the almost white hot glow of coals to begin to show. Once the coals were at the right temperature, Nikodemus took some material and begin to craft. The first items he forged were a steel shield and a steel warhammer of good quality. Next he worked a piece of material and forged a special rapier. The blade was much like a normal rapier, but had a slight thickness to it that allowed for both slicing cuts, and thrusting stabs. The hand guard was made from a modified longsword cross guard with a secondary ring guard on the opposite ends unprotected sides. His next item was a unique dagger. He had used Ebony Steel to make the weapon black, but a property in the material turned the blade a golden hue. When forging it, Nikodemus forged a curve along the spine of the blade, making the edge into a wicker curve that would cut deeper. The handle itself mirrored the curve of the blade and gave the whole dagger a strange, exotic look. The last item he forged was a 2 handed spear. It's blade collar was made in the shape of a dragon, the blade protruding from the open mouth. The blade itself had a gentle curve along it's length until the last few inches were straight and tapered to a deadly point. The haft of the blade was a cherry wood, colored red and reinforced with Ironwood for sturdiness. Taking the items, he went to have them evaluated. Rolls: Spoiler ID# 56623 results: perfect Craft: 12 + 1 = 13 ID# 56624 results: good Craft: 4 + 1 = 5 ID# 56625 results: rare Craft: 10 + 1 = 11 ID# 56626 results: Rare Craft: 10 + 1 = 11 ID# 56627 results: good Craft: 4 + 1 = 5 Items: Spoiler Name: Ascalon Profession: Blacksmith Rank: 4 ID# 56623 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Two Handed Assault Spear Enhancements: (3/3) Accuracy: +1 BD, cannot cause crits. DMG: +1, Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier 1 = 8) damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). Description: A large two handed spear, Ascalon is made of a cherry wood that is colored red. The shaft is reinforced with an inner core of hard Ironwood to protect it from shattering. The blade collar of the spear is shaped like the head of a dragon, the blade protruding from it's mouth. the blade is forged with gentle curves running from the collar to near the tip. the last 4 inches of the blade are straight and tapered to a point for piercing through tough scales or thick armor. The spear is named for the famed spear of a dragon slayer saint. Name: Steel Shield Profession: Blacksmith Rank: 4 ID# 56624 CD: 4 + 1 = 5 Quality: Good Tier: 1 Item Type: Shield Enhancements: None Description: A basic steel shield. The front side is blank and can be adorned with any guild crest or personal insignia. Name: Carnwennan Profession: Blacksmith Rank: 4 ID# 56625 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One Handed Rapier Enhancements: (2/2) Keen: On a successful attack, gain an additional +1 to your BD for each enchantment slot. This bonus does not stack with itself. This bonus goes away after landing a successful attack. (1 slot) Damage: +1 DMG. Description: A one handed rapier made of fine materials. The thin blade is sharp and durable, able to slice and stab with ease. The hand guard is a modified long sword crossguard with a secondary ring guard on the opposite sides of the crossguard, providing full protection to the user, but not limiting their grip or hand and arm movements. The blade is named for a legendary shortsword that was used to split a witch in 2 with one swing. Name: Lord's Blade Gold Tracer Profession: Blacksmith Rank: 4 ID# 56626 CD: 10 + 1 = 11 Quality: Rare Tier: 2 Item Type: One Handed Dagger Enhancements: (2/2) Bleed: Activated on a roll of 8-10. Deals (8 * Tier 2 = 16) damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (2 Slots) Description: A strange dagger made of fine ebony steel with a golden blade. The weapon has a wicked curve in it's length and the handle has a mirrored curve to match. The blade is so sharp and almost ethereal that it is said that one kiss of this weapon will cause the victim to bleed to death in mere minutes. Name: Steel Warhammer Profession: Blacksmith Rank: 4 ID# 56627 CD: 4 + 1 = 5 Quality: Good Tier: 1 Item Type: One handed Warhammer Enhancements: None Description: A basic steel warhammer. It's size and bulk are large, but the damage output can be great. Overall results: -5 mat, +5 item, 22 EXP earned Picture of Lord's Blade Gold Tracer: Spoiler Edited April 15, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 15, 2016 Author #15 Report Share Posted April 15, 2016 (edited) General upkeep: SOLD: Cuirass of the Iron Wall: SOLD TO KHRYSOAR Spoiler Name: Cuirass of the Iron Wall Quality: Rare Tier: 1 Item Type: Heavy armor Enhancements: (2/2) Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage (1 Slot). Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used (1 Slot). Description: The whole Cuirass was shaped to provoke images of wall protecting a village. The curved edges of the plates and spiked linings here and there showing off a more deadly side to it. Earned: 850 Col. 2 Mats. Edited April 15, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 18, 2016 Author #16 Report Share Posted April 18, 2016 (edited) Deciding to get some work done, Nikodemus went into his forge and began to work. His first item was a fail, and he couldn't salvage anything from it. Grumbling, he tossed the lump of material away and then began on his next item. It turned out better, and he forged a nice pair of steel gauntlets. Setting them aside, he began his work on the third item, and drew out a nice axe. Working it to a decent size, Nikodemus then attached it to a wooden handle that was reinforced with a steel core. His next item he began forging a full arm weapon. It started as a gauntlet, but then became a strange rounded tube with a rounded head where the hand gripped a handle inside. Coming from the head was a long thin blade. Working the blade, he strengthened it well and made sure it wouldn't snap off when clashing with armor or another weapon. He then engraved and etched the arm guard, and chased the etchings with gold and silver. His last forging produced a large katana, nearly 6 feet in length. He used a combination of Ebony Steel and Ash-infused Steel to create the rusted look of the blade, but knew it was only a look and the blade was quite durable and sharp. He worked the blade to make it even sharper, and then finished the handle and tsuba, leaving both simple and etching in some swirls into the tsuba. Upon finishing, he took the items for approval. Rolls: Spoiler ID# 56950 results: Uncommon Craft: 9 +1 = 10 ID# 56951 results: Perfect Craft: 12 + 1 = 13 ID# 56952 results: Good Craft: 8 + 1 = 9 ID# 56953 results: Rare Craft: 10 + 1 = 11 ID# 56954 results: Fail Craft: 2 + 1 =3 Overall Results: -5 mats, +4 items, 19 EXP. Items: Spoiler Name: Woodsman's Axe Profession: Blacksmith Rank: 4 ID# 56950 CD: 9 +1 = 10 Quality: Uncommon Tier: 1 Item Type: One Handed Battle Axe Enhancements: (1/1) Keen: On a successful attack, gain an additional +1 to your BD for each enchantment slot. This bonus does not stack with itself. This bonus goes away after landing a successful attack. Description: A strong axe with great balance and structure. It allows for precise attacks, allowing the user to hit harder and more often. Name: Steel Gauntlets Profession: Blacksmith Rank: 4 ID# 56952 CD: 8 + 1 = 9 Quality: Good Tier: 1 Item Type: Heavy Armor Enhancements: None Description: A basic pair of steel gauntlets. Their design is reminicent of 13th century european origins. Name: Pata Profession: Blacksmith Rank: 4 ID# 56953 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Wild Dance Enhancements: (2/2) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). +1 Damage Description: A strange amalgamation of gauntlet and punch knife, the Pata is a dual pair of Wild Dance items that fit over the forarm tightly and have a 9 inch blade extending from the top of the guard. This weapon is designed on an hindu based weapon of similar make. The guard is intricately carved with swirls and symbols that are chased with gold and silver. Name: Uchigatana Profession: Blacksmith Rank: 4 ID# 56951 CD: 12 + 1 = 13 Quality: Perfect Tier: 2 Item Type: Katana Enhancements: (3/3) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier 2 = 16) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) (2 Slots). Damage: +2 DMG. (1 Slot) Description: A strange variant of the Katana, the Uchigatana is nearly 6 feet long, the blade being a good 5 and a half feet in length. It's steel is made of a unique combination of Ebony Steel with Ash-infused Steel, giving the blade a dark, almost rusted look to it. The blade is sharp and capable of causing deep cuts that can bleed for long periods of time. ID# 56954 results: Fail CD: 2 + 1 =3 Edited April 18, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 19, 2016 Author #17 Report Share Posted April 19, 2016 (edited) Waking after a long night, Nikodemus shook the weariness from his limbs and stretched his large frame. Still groggy, Nikodemus stumbled into his forge and began to tinker around with forging some items. After waking up completely, he began to work in earnest. his first two attempts failed miserably, but he expected that as he had not stoked the forges properly, and the heat was not at the right temperature. Adjusting this by repeatedly stoking the forge with the bellows, Nikodemus then crafted a nice pair of greaves. His 4th attempt provided him with a rare dagger. His last two efforts provided a great cuirass of perfect design, and a pair of gauntlets that could split wood and stone with a few strikes. Smiling at his creations, he wrapped them all and took them for evaluation. Rolls: Spoiler ID# 57068 results: Perfect Craft: 11 + 1 = 12 ID# 57069 results: Perfect Craft: 12 + 1 = 13 ID# 57070 results: Rare Craft: 10 + 1 = 11 ID# 57071 results: Uncommon Craft: 8 + 1 =9 ID# 57072 results: fail Craft: 2 + 1 = 3 ID# 57074 results: fail Craft: 2+ 1 = 3 Overall Results: -6 mats, +4 items, 26 EXP earned Items: Spoiler Name: Fists of Manju. Profession: Blacksmith Rank: 4 ID# 57068 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Heavy Armor Gauntlets Enhancements: (3/3) Unarmed Damage: Adds +(1 * Tier 1) base damage for every slot used. (2 Slots), Heavy Momentum: When you miss, gain a +(1 * Tier 1) base dmg. This can stack up to the amount of slots used. The +dmg goes away after a successful hit. (1 Slot) Description: A pair of gauntlets made from a strange material and shaped to provide a full coverage of the hand and wrist. The metal is etched with many markings and runes. The knuckles of these gauntlets are rounded slightly to produce a medium of energy transfer, allowing for harder hits. These gauntlets are named after a mythical being named Manju of the Ten Thousand Hands, a martial artists being who is said to be able to strike a man 10,000 in the span of a moment. He was also famed for splitting the Rock of Ages, allowing the time of the Gods to end, and the time of Men to begin. Name: The Aegis Profession: Blacksmith Rank: 4 ID# 57069 CD: 12 + 1 = 13 Quality: Perfect Tier: 1 Item Type: Heavy Armor Cuirass Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (1 Slot) Regen: Heals you +(9 * Tier 1) per slot after every attack turn from your opponent on a CD roll of 6 or higher. (1 Slot) Thorns: Deals X* (7 * Tier 1) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (1 Slot) Description: A highly durable armor that protects the wearer from damage, while harming the attacker. It is also capable of healing it's wearer should they ever require it. This armor was said to be given to a famous king to help him in battle to unite a kingdom in turmoil. During the final battle betweent he king and his son who had turned traitor, the suit protected the king from a mortal blow, allowing him one last attack, which ended his son and finished the war. Name: Leggings of the Bulwark Profession: Blacksmith Rank: 4 ID# 57071 CD: 8 + 1 =9 Quality: Uncommon Tier: 1 Item Type: Heavy Armor Greaves Enhancements: (1/1) Damage Mitigation: Removes (9 * Tier 1) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Description: A pair of leggings that are as strong as a castle wall. They protect the wearer from taking large amounts of damage. Name: Raptor Talon Profession: Blacksmith Rank: 4 ID# 57070 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: One handed dagger Enhancements: (2/2) +2 DMG Description: A curved dagger made from black ebony steel. the blade is sharp and can pierce through even the toughest of scale or steel. ID# 57072 results: fail Craft: 2 + 1 = 3 ID# 57074 results: fail Craft: 2+ 1 = 3 Edited April 20, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 21, 2016 Author #18 Report Share Posted April 21, 2016 (edited) Deciding to do some work, Nikodemus began to forge once again. After some time, he had grunted with failure and tossed the failed bits of slag aside. Of the fails he had, only one was salvagable. From it he made a good boot dagger. His next item he made was a new hammer for forging. He like it's shape and look so finished it without much more forging. His last item was a fine Tulwar sword. After forging the blade, he took time to etch gold gilding along the blade and handle, as well as add fine jewels to it. Once it was finished, he took both to be evaluated. Rolls: Spoiler ID# 57190 results: good Craft: 5 + 1 = 6 ID# 57191 results: fail Craft: 1 + 1 + 2 ID# 57192 results: fail, salvaged mats Craft: 3 + 1 = 4 Loot: 18 ID# 57193 results: rare Craft: 9 + 1 = 10 ID# 57194 results: perfect Craft: 11 + 1 = 12 ID# 57196 results: fail Craft: 2 + 1 = 3 -5 mats, +3 items, 18 EXP earned Items: Spoiler Name: Hammer of Weyland Profession: Blacksmith Rank: 5 ID# 57194 CD: 11 + 1 = 12 Quality: Perfect Tier: 1 Item Type: Tool Enhancements: +1 CD Description: A black hand hammer shaped in a hexagonal pattern. Along the many faces of the hammer gleam red and gold veins that imbue the hammer with strength and precision of hits. This hammer is named for the famed God of Blacksmiths and Soliders. Name: Jeweled Tulwar of the Red Hawk Profession: Blacksmith Rank: 5 ID# 57193 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One Handed Curved Sword Enhancements: (2/2) Keen: On a successful attack, gain an additional +1 to your BD for each enchantment slot. This bonus does not stack with itself. This bonus goes away after landing a successful attack. Every second tier step (tier 3, 5, 7 etc.) this will add a further +1 per slot. Damage: +1 DMG Description: A curved blade made from a fine material. It's curved blade is decorated with gold etched designs and jewels. The handle and Cross Guard are equally as decorated with precious gems. Despite the ostentatious look of the weapon, it is wickedly sharp and balanced perfectly to allow for a keen weapon. In the right hands, it can cleave a man in twain with little effort involved. Name: Steel Boot Dagger Profession: Blacksmith Rank: 5 ID# 57190 CD: 5 + 1 = 6 Quality: Good Tier: 1 Item Type: One Handed Dagger Enhancements: None Description: A basic dagger made to be concealable in a boot for use when unarmed. It's thin blade is mainly used for thrusting through basic armor and cloth. Edited April 21, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 21, 2016 Author #19 Report Share Posted April 21, 2016 (edited) Waking up for the day, Nikodemus went to his forge and began to work. His work was short for the day. Most of his items were just basic steel and nothing to ostentation. Working the steel he made a helmet, shield and falchion. He attempted to craft 2 more items, but both failed and couldn't be salvaged. His last forge came out nice and he was glad it to didnt fail. The 2 Handed Battle Axe was of a great quality and would be a nice new addition to his shop. Taking them, Nikodemus left for evaluation. Rolls: Spoiler ID: 57306 good Craft: 5 + 1 = 6 ID: 57305 good Craft: 6 + 1 = 7 ID: 57304 good Craft: 5 + 1 = 6 ID: 57303 rare Craft: 10 + 1 = 11 ID: 57302 fail Craft: 1 + 1 = 2 ID: 57301 fail Craft: 3 + 1 = 4 -6 mats, + 4 items, 13 EXP Items: Spoiler Name: Axe of Despair Profession: Blacksmith Rank: 5 ID# 57303 CD: 10 + 1 = 11 Quality: Rare Tier: 1 Item Type: Two Handed Battle Axe Enhancements: (2/2) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 Slot) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 Slot) Description: A strange axe made of Ebony Steel set into a strange wooden handle. The blade is sharp and large, capable of biting deep and stunning an opponent. The handle is made of a twisted tree limb. A large knot sit at the top of the limb where the axe blade is connected to the handle. It's twisted and malformed shape resembles a face wailing in sorrow. Name: Steel Helmet Profession: Blacksmith Rank: 5 ID# 57306 CD: 5 + 1 = 6 Quality: Good Tier: 1 Item Type: Heavy Armor Helmet Enhancements: None Description: A basic steel helmet. It is decorated with a feathered plume and has a slanted faceplate with breather holes in it. Name: Steel Buckler Profession: Blacksmith Rank: 5 ID# 57305 CD: 6 + 1 = 7 Quality: Good Tier: 1 Item Type: Shield Enhancements: None Description: A medium sized round shield with a domed center used for parrying and and deflecting weapons. It's rounded edges are flat and and can be used to bash an opponent or their weapon. Name: Steel Falchion Profession: Blacksmith Rank: 5 ID# 57304 CD: 5 + 1 = 6 Quality: Good Tier: 1 Item Type: One Handed Longsword Enhancements: None Description: A basic steel sword with a wide blade shape and slightly curved tip. It is can be used to chop and slash an opponent or stab them. Edited April 21, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Nikodemus_Blackwood 1 Posted April 22, 2016 Author #20 Report Share Posted April 22, 2016 (edited) Having been working since returning from floor 6, Nikodemus had worked in the forge on a new weapon for most of the day. As he finished it, he worked an engraving of rose petals in the tsuba. Setting it aside, he then began to work on another weapon. He forged a good spear head and attatched it to a wooden handle that was large and would need 2 hands to us. His last item was a whip made of braided leather with a split at the top, nine seperate flails tipped with razor sharp heads. the handle was a cherry wood handle and he had engraved a nine tailed fox into the wood. After finishing the items, he realized he was out of materials and so stopped for the day and took the 3 items for evaluation. Rolls: Spoiler ID# 57412 results: Rare Craft: 9 + 1 = 10 ID# 57413 results: good Craft: 5 + 1 =6 ID# 57414 results: Rare Craft: 9 + 1 = 10 -3 mats, + 3 items, 12 exp Items: Spoiler Name: Bara utsukushī sōn (Roses Stunning Thorn) Profession: Blacksmith Rank: 5 ID# 57412 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: Katana Enhancements: (2/2) Bleed: Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot) Paralyze: Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. (1 slot) Description: A Katana with a gorgeous hamon in in the shape of pointed thorns. The blade is deviously sharp and can cut to, and through, bone. The Tsuba is circular and has the etching of a rose's petals in the wind along it's surface. Name: Steel Assault Spear Profession: Blacksmith Rank: 5 ID# 57413 CD: 5 + 1 =6 Quality: Good Tier: 1 Item Type: Two Handed Assault Spear Enhancements: None Description: A basic 2 handed spear used to strike and thrust an opponent. The blade is nearly 1 foot long and about 4 inches wide. Name: Whip of the Nine Tailed Fox. Profession: Blacksmith Rank: 5 ID# 57414 CD: 9 + 1 = 10 Quality: Rare Tier: 1 Item Type: One Handed Whip Enhancements: (2/2) Accuracy: Adds +1 to the BD, but cannot cause a critical hit. (1 Slot) Damage: Adds +1 base damage. (1 slot) Description: A whip made with of thick braided leather and a quicksilver core for strength. Near the top, the braid splits into nine seperate flails, each tipped with razor sharp tips that carve and strike at opponents flesh. The handle of the whip is made of a red cherry wood and has the engraving of a fox with nine tails upon it. Edited April 23, 2016 by Nikodemus_Blackwood Quote Report Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.