[F9] Dark Iron Forge (Rank 4 Blacksmith) Closed

[Zuel 0]

Dark Iron Forge

After reaching floor nine, Zuel finally found the environment he was looking for to create his blacksmith workshop. Zuel was waiting for a rocky location to have access to a lot of ore with natural made lava rivers to forge his weapons with. Not traveling to far from Yōgan Village, Zuel would find a lava river running through an open area with a cave nearby that held and abundance of ore including Obsidian ore that he could use to craft weapons. Zuel wanted his blacksmith workshop to match the Obsidian deep black colors, so he built it entirely using Obsidian ore. He would built it so the forge would connect to the lava river that ran through the mountain near it, allowing him to use the lava when he crafted weapons. In the center of the building would lay the Anvil that was made with the darkest and strongest obsidian Zuel could find. He decided to name workshop "Dark Iron Forge" because of the Obsidian he used to build the it as well as the type of weapons he wanted to craft. It may have been out of the way for a shop but for right now Zuel just wanted to gather materials and craft equipment on his own to raise his blacksmithing skill in order to make more powerful gear for him and his allies. With his blacksmith workshop complete it was time to get crafting. All Zuel's crafts are unique due to the lava forge and obsidian ore that he uses given most of his crafts a dark black color to them with a bit of red from the lava.

Blacksmith Stats

Spoiler

• [80/159 EXP] Rank 4 - Beginner Blacksmith: Able to craft Tier 4 equipment. 5 crafts per day.

►Rank 4
    [1] = Critical failure (Lose materials)
    [2-3] = Fail (Lose materials)
    [4-6] = Salvage (Keep materials on LD 11+)
    [7-9] = Uncommon item (1 slot)
    [10-11] = Rare item (2 slots)
    [12] = Perfect item (3 slots)

Materials Log

Spoiler

ID# 104199 CD: 5 (Failure) (Lose Materials) (-2 Tier 1 Materials)

ID# 104200: CD 7 (Failure) LD: 10 (Lose Materials) ( -2 Tier 1 Materials)

ID# 104269 CD 4 (Failure) (Lose Materials) (-2 Tier 1 Materials) 

ID# 104269 CD: 11 (Success)(Rare Quality One handed Straight Sword) (-2 Tier 1 Materials)

ID# 104357 CD: 11 (Success)(Rare Quality One Handed Straight Sword) (-2 Tier 1 Material)

ID# 104358 CD: 10 (Success) (Uncommon Quality One Handed Straight Sword) (- 2 Tier 1 Materials)

ID# 104360 CD: 4 (Failure) (- 2 Tier 1 Materials)

D# 104424 CD: 1 (Critical Failure) (-2 Tier 1 Materials)

ID# 104529 CD: 9 (Success)(Uncommon 1 handed sword) (-2 Tier 1 Materials)

ID# 104531 CD: 10 (Success)(Uncommon 1 handed sword) (-2 Tier 1 Materials)

ID# 104561 CD: 2 (Failure) (-2 Tier 1 Materials)

ID# 104562 CD: 12 (Success) (Perfect Tier 1 One handed Sword) (-2 Tier 1 Materials)

ID# 104563 CD: 3 (Failure) (- 2 Tier 1 Materials)

ID# 104635: CD: 8 (Success) (Uncommon 1 Tier heavy armor)  (- 2 Tier 1 Materials)

ID# 104636: CD: 2 (Failure) (- 2 Tier 1 Materials)

ID# 104637: CD: 10 (Success) (Uncommon 1 Tier heavy armor)  (- 2 Tier 1 Materials)

ID# 104638: CD: 9 (Success) (Uncommon 1 Tier heavy armor)  (- 2 Tier 1 Materials)

ID# 107149 CD: 12 (Success) (Perfect Tier 1 heavy armor) (- 2 Tier 1 Materials)

Crafted Items

Spoiler

ID# 104077 CD: 11 (Rare item)

ID# 104269 CD: 11 (Rare Quality Two handed Straight Sword)

ID# 104357 CD: 11(Rare Quality Two Handed Straight Sword) 

ID# 104358 CD: 10 (Uncommon Quality Two Handed Straight Sword)

ID# 104529 CD: 9 (Uncommon Two handed sword) 

ID# 104531 CD: 10 (Uncommon Two handed sword) 

ID# 104562 CD: 12 (Perfect Tier Two One handed Sword)

ID# 104635: CD: 8 (Uncommon Tier 1 heavy armor)

ID# 104636: CD: 10 (Uncommon Tier 1 heavy armor) 

ID# 104638: CD: 9 (Uncommon Tier 1 heavy armor) 

ID# 106793 CD: 9 (Uncommon Tier 1 heavy armor)

ID# 106796 CD: 9 (Uncommon Tier 1 heavy armor)

ID# 106870 CD: 12 (Perfect Tier 1 heavy armor)

ID# 107149 CD: 12 (Perfect Tier 1 heavy armor)

 

 

 

Edited October 9, 2018 by Zuel

[Zuel 0]

Starting at rank one blacksmith Zuel could only craft two items a day so it might take some time to level up as well as create that perfect one handed sword. He would begin with taking his Tier 1 materials and heating them in the obsidian lava forge. After turning the material and letting it heat in the forge for a little he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. Unfortunately his craft was unsuccessful as the ore would shatter and crumble into dust then disappearing. Not really deterred he would grab another Tier 1 Material hoping for some better luck with the next ore. Zuel took the second Tier 1 material and heated it in the obsidian lava forge. After turning the material and letting it heat in the forge for a little he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. After a final hit it would begin to shape into a weapon as it was glowing bright to see if it was a success or not.

First Craft 

Spoiler

ID# 104199 CD: 5 (Failure) (Lose Materials)

+1 EXP

Second Craft

Spoiler

ID# 104200: CD 7 (Failure) LD: 10 (Lose Materials)

+1 EXP

 

Edited August 8, 2018 by Zuel

[Zuel 0]

After waking up at the inn in the Town of Beginnings, Zuel would make his way back to floor 9 where his workshop would be. It was time to try again to create that perfect sword. Gathering his materials Zuel would enter his workshop and begin lighting the forge to heat it up. It didn't take much time because the lava running though would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. The final hit would cause the ore to break in half as it would shatter and disappear losing the materials. Afterwards Zuel would grab the other ore from the forge and repeat the process hoping for a success this time around. Zuel would keep hammering as the sword begin to shape but it didn't break this time. It would form into a one handed straight sword and though not perfect it was still of rare quality. Zuel would inspect the sword and place it on his mantle to cool off after quenching it in liquid.

First Craft

Spoiler

ID# 104268 CD: 4 (Failure) (Lose Materials)

+1 EXP

Second Craft

Spoiler

ID# 104269 CD: 11 (Success) (Rare Quality One handed Straight Sword)

+5 EXP

Edited August 9, 2018 by Zuel

[Zuel 0]

Getting ready for another day on crafting. It was time to try again to create that perfect one handed straightsword. Zuel would enter his workshop and begin lighting the forge to heat it up. It didn't take much time because the lava running though would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. Afterwards Zuel would grab the other ore from the forge and repeat the process hoping for a success this time around. Zuel would keep hammering as the sword begin to shape but it didn't break this time. It would form into a one handed straight sword and though not perfect it was still of rare quality. Zuel would inspect the sword and place it on his mantle to cool off after quenching it in liquid. final hit would cause the ore to form into an uncommon one handed sword as he quenched it in liquid placing it on the wall with the rest of his swords. Now that Zuel had reached rank 2 Blacksmith he was now able to craft three times a day. Attempting to repeat his earlier process to try to create that perfect sword.

First Craft

Spoiler

ID# 104357 CD: 11 (Success)(Rare Quality One Handed Straight Sword) (-1 Tier 1 Material)

+5 EXP

Second Craft

Spoiler

ID# 104358 CD: 10 (Success) (Uncommon Quality One Handed Straight Sword) (- 1 Tier 1 Materials)

+ 3 EXP

Third Craft

Spoiler

ID# 104360 CD: 4 (Failure) (- 1 Tier 1 Materials)

+1 EXP

 

Edited August 10, 2018 by Zuel

[Zuel 0]

Now Rank 2 Zuel was prepared to have better results in his crafting and really wanted to create a more powerful weapon. It was time to try again to create that perfect one handed straightsword. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. Afterwards Zuel would grab the other ore from the forge and repeat the process hoping for a success this time around. Zuel would keep hammering as the sword begin to shape but it would be a failure. However the materials would not be damage allowing him to reuse the same materials.  Zuel would begin again as a final hit would cause the ore to shatter from repeated hit causing him to lose the materials. Now that Zuel had reached rank 2 Blacksmith he was now able to craft three times a day. Attempting to repeat his earlier process to try to create that perfect sword. However he was unsuccessful but managed to salvage the materials once again.

First Craft

Spoiler

D# 104423 CD: 6 (Failure) LD: 14 (Materials Salvaged)

+2 EXP

Second Craft

Spoiler

D# 104424 CD: 1 (Critical Failure) (-1 Tier 1 Materials)

+1 EXP

Third Craft

Spoiler

D# 104425 CD: 7 (Failure) LD: 16 (Materials Salvaged)

+2 EXP

 

Edited August 11, 2018 by Zuel

[Zuel 0]

Having gained quite a few levels now Zuel was prepared to have better equipment and needed to work on his crafting in order to  obtain a more powerful weapon. It was time to try again to create that perfect two handed straight sword. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. Afterwards Zuel would grab the other ore from the forge and repeat the process hoping for a success this time around. Zuel would keep hammering as the sword begin to shape but it would be a failure. However the materials would not be damage allowing him to reuse the same materials.  Zuel would begin again as a final hit would cause the ore to shatter from repeated hit causing him to lose the materials. Now that Zuel had reached rank 2 Blacksmith he was now able to craft three times a day. Attempting to repeat his earlier process to try to create that perfect sword. However it was just another uncommon sword like before. It may not be perfect but at least it was decent EXP for his blacksmithing.

 

First Craft

Spoiler

ID# 104529 results: CD: 9 (Success)(Uncommon 1 handed sword) (-1 Tier 1 Materials)

+ 3 EXP

Second Craft

Spoiler

ID# 104530 results: CD: 5 (Failure) LD: 20 (Materials Savaged)

+ 2 EXP

Third Craft

Spoiler

ID# 104531 results: CD: 10 (Success)(Uncommon 1 handed sword) (-1 Tier 1 Materials)

+ 3 EXP

 

Edited October 9, 2018 by Zuel

[Zuel 0]

Having gained quite a few levels now Zuel was prepared to have better equipment and needed to work on his crafting in order to  obtain a more powerful weapon. It was time to try again to create that perfect two handed straight sword. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. The weapon would forge and before him Zuel finally had what he had been looking for. A perfect one handed straight sword with three slots. Now having the perfect sword he needed the perfect armor since Zuel was now rank 3 as well as Zuel began to get another material to craft the perfect heavy armor.

First Craft

Spoiler

ID# 104561 results: CD: 2 (Failure) (-1 Tier 1 Materials)

+ 1 EXP

Second Craft

Spoiler

ID# 104562 results: CD: 12 (Success) (Perfect Tier 1 two handed Sword)

+ 8 EXP

Third Craft

Spoiler

ID# 104563 results: CD: 3 (Failure) (- 1 Tier 1 Materials)

+ 1 EXP

 

Edited October 9, 2018 by Zuel

[Zuel 0]

Finally having his perfect sword it was time for Zuel to craft his perfect armor. Having reached rank 3 in blacksmithing he was pretty much set for the gear he wanted to craft for awhile.  It was time to try again to create that perfect armor. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. The weapon would forge and before him Zuel finally had what he had been looking for. A perfect one handed straight sword with three slots. Now having the perfect sword he needed the perfect armor since Zuel was now rank 3 as well as Zuel began to get another material to craft the perfect heavy armor.

 

First Craft

Spoiler

ID# 104635: CD: 8 (Success) (Uncommon 1 Tier heavy armor)  (- 1 Tier 1 Materials)

+ 3 EXP

Second Craft

Spoiler

ID# 104636: CD: 2 (Failure) (- 1 Tier 1 Materials)

+ 1 EXP

Third Craft

Spoiler

ID# 104637: CD: 10 (Success) (Uncommon 1 Tier heavy armor)  (- 1 Tier 1 Materials)

+ 3 EXP

Fourth Craft

Spoiler

ID# 104638: CD: 9 (Success) (Uncommon 1 Tier heavy armor)  (- 1 Tier 1 Materials)

+3 EXP

 

Edited August 15, 2018 by Zuel

[Zuel 0]

Zuel wanting to create a perfect tier 1 armor piece would head back to his workshop and get everything prepared for the day. He had collected some more materials from his last mission so he was sure this time he would be able to get what he needed. Having reached rank 3 in blacksmithing he was pretty much set for the gear he wanted to craft for awhile.  It was time to try again to create that perfect armor. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. Not managing to craft the perfect armor today Zuel would have to try again tomorrow.

 

First Craft

Spoiler

ID# 106792 results: (Failure)

CD: 5

LD: 1

+1 exp

Second Craft

Spoiler

ID# 106793 results: (Success)

CD: 9

LD: 20

+3 EXP

Third Craft

Spoiler

ID# 106794 results: (Failure)

CD: 1

LD: 20

+1 exp

Fourth Craft

Spoiler

ID# 106796 results: (Success)

CD: 9

LD: 12

+3 exp

Edited October 6, 2018 by Zuel

[Zuel 0]

Still wanting to create a perfect tier 1 armor piece would head back to his workshop and get everything prepared for the day. He had collected a lot more materials from his last mission so he was sure this time he would be able to get what he needed. Having reached rank 3 in blacksmithing he was pretty much set for the gear he wanted to craft for awhile.  It was time to try again to create that perfect armor. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. The first two attempts were failure and just as Zuel was about to call it quits his final craft was perfect! Had done it crafted the perfect tier 1 heavy armor!

First Craft

Spoiler

ID# 106868 results: (failure)

CD: 2

+1 EXP

Second Craft

Spoiler

ID# 106870 results: (failure)

CD: 6

+1 EXP

Third Craft

Spoiler

ID# 106870 results: (Success)

CD: 12

+8 EXP

 

Edited October 7, 2018 by Zuel

[Zuel 0]

Still wanting to create a perfect tier 1 armor gloves would head back to his workshop and get everything prepared for the day. He had collected a lot more materials from his last mission so he was sure this time he would be able to get what he needed. Having reached rank 3 in blacksmithing he was pretty much set for the gear he wanted to craft for awhile.  It was time to try again to create that perfect armor gloves. Zuel would enter his workshop and begin lighting the forge to heat it up. He would heat it up quickly as Zuel prepared his first material heating it up in the forge until it was glowing bright. After turning the material he would pull it out and place it on his anvil and begin hammering away at the molten glowing ore. As he hit it with his blacksmithing hammer he would begin to shape the object as it would begin to form the more he hit it. With one final hit the object began to turn into a weapon hoping it would be a success. To Zuels surprise he would crate the Gauntlets is one try and they were perfect as well! His skills as a blacksmith really were improving as he would level up!

First Craft

Spoiler

ID: 107149 results: Success 

CD: 12

+8 exp

+ 1 Perfect Tier 1 Gauntlets

 

Edited October 9, 2018 by Zuel